3rd Gen Magnetic Gray Thread

17inch 2020 pro replicas

 

Really like the chrome bumper and grille surround. It's just enough to make it look like a traditional "truck".

 

not 285’s, but f5’s. It’s on 265/70/17 wildpeaks.

 

Looks good. I really want black but have to wait on them. Thinking gunmetal but don't know if they will make the truck look a tad dated in that color. They are sort of retro wheels as-is. Also is that the -10 offset ?

 

I love the look of the Raptor style lights on with this lighting.

 

she's come a long way.

 

285s? Spacers to clear UCA if so?

 

how did you wire in the raptor lights? are the on with the drls and the head lights or just the drls?

 

Yes I have 1.50 spacers and the tires are 285/75/16

 

Wired it to the corner lights. I can use it with the headlights as well.

 

Cali Raised Raptor tail lights. This before the wash and clay bar.

 

could you post a picture of how you did that please? i have raptor lights on mine but only have them tied to the headlight fuse as i cant seem to find a way to get them to stay on always while driving

 

My MGM Tacoma and wife’s PGM VW Passat R-Line.. Platinum Grey Metallic..

 

Just cleaned her up:

 

Just ripped basically all the dash out to install new lower switch panel from MESO. Well I was cutting from the front and not the back like you should be doing apparently and realized before cutting sides off I was fucked. So I epoxied it back together and put everything back in. Now I’ll have to buy a new factory panel just to cut up and do this all again. Haha Wasn’t a total waste though as I was still able to move my rear window to the center.

 

Is there a downside to leaving out the center caps? I like the look.

 

Do you rub when turning?
I have the same size tires, with the TRD PRO wheels and 1.1/4" wheel spacer and rub the plastic fender well right by the pinched weld when turning and going over small bumps..

 

No I do not. My offset (prior to the spacer) is +25mm and yours is +4mm that is why you rub. Mine only rubs when flexing hard and it is because of my Mud flaps.

 

Are you also running spacers? if so what size?