Eibach pro lift kit

What notch is the front at ? And what tire size ?

 

Bottom notch. 2" lift springs and 1/2" top spacer. 3" total lift. 2.5" remaining down travel. 275/70/18 (33*11)

 

If any of you live on Maui shoot me a PM

 

Do u need need new top screws when you use those spacers ,?

 

Came with the spacers when ordered from Toytec

 

You’re gonna love them.

Just put mine on with wheels and tires today. So much better than stock!

 

Thanks! I’m very excited to install everything. Just waiting on my buddy who owns & operates a garage to let me know when we are doing it. He isn’t charging me a cent for the install and alignment, so I can’t be too pushy.

I already bought a set of wheels, so I’m using this time to research tires. I’m looking hard at the pros & cons of the Falken WildPeaks, Goodyear DuraTracs, & BFG KO2’s.

 

Good for you. I had some experienced help with the install and it was just a few hundred to do it.
I went back and forth on the tires and ended up with KO2’s- C load. The C load KO2’s are plush.

 

I like the KO2’s. I’ve had the originals in the past and have few complaints. However, I’m running a 16” wheel. The KO2’s in 265-75-16 only come in E-Load. I’m a bit concerned about whether or not this will be too heavy of a tire.

 

Just installed a set of Icon sway bar blocks. Toytec advised that I didn’t need them with this lift kit. I probably would have been okay most of the time, but the sway bar was less than 1/4” from the spring perch.
Not sure why, but my photos keep getting randomly rotated when I upload them...
Before
After

 

Something doesn’t look right. Is that with your tires on and the truck sitting on the ground? I didn’t use any sway bar blocks.

 

yes, but it looks weird because when I upload pictures on here it randomly rotates them.

like I said, I probably didn’t need them because it technically wasn’t touching, but it was very close and I had already ordered them, so I put them on. Now there is plenty of clearance.

 

Well, now that I think about it when I installed my cbi hidden winch mount, there was a bracket that attaches to and between the frame and the sway bar mounts. So.. I guess I do have a some sort of sway bar blocks.

 

I have E KO2s on my '16 for about 40k miles now. They are excellent.

 

Thank you! Like I mentioned, I’ve had good luck with sets I’ve had in the past. However, those were the original KO’s. I have no experience with the newer KO2’s. I might give them a try. I was just concerned about the weight of an E-Load tire, but it’s probably not a big deal. People add more weight than that when they install winches, bumpers, armor, caps, etc. I’m probably worrying over nothing.

 

E load is fine check out Yokohama x-At 265/75/16 32” great tire. Just my 2cents

 

Is that near Lima??

 

Mistype (did you mean 265?) or where did you find that size? I'm looking them up now and I can't seem to find a 275/75R16 in the Yoko X-AT, even on the Yoko website.

Not trying to be an ass, you just peaked my interest is all so I went looking.

 

Sorry 265 my bad

 

front shot. Not bad at all it’s not a 285 but on a small 1.5” lift or 2” looks good imo