Ontario BS Thread

it's easy just follow these




for to in range (yo,ta):

if cinco_de_mayo == taco_tuesday:

print ("Happy Taco Tuesday:toyota:")​

else:

print ("fvck corona")​

 

BUT CAN I FIT 35?!

https://www.apple.com/ca/shop/product/MX572ZM/A/apple-mac-pro-wheels-kit

 

he keeps his Macbook Pro there on the left.

 

I punch those numbers into a calculator, it makes a happy face.

 

$1200 monitor stand first: https://www.apple.com/ca/shop/product/MWUG2VC/A/pro-stand Priorities.

 

This could look good on my truck mounted to the floor and holding $99 gps navigator

 

Whaaaa wtf 1200 for that? You gotta be pullin my leg who the f would even consider paying 1200 for that and who would have the balls to charge 1200 for that?

Oh I followed the link...

Mac Users.... makes sense now...

carry on ....

 

That's the Russian spirit! Get the 24K one.

BTW I got the Royal Dalton crystal set, lets go play some beer pong.

 

The sun was out this morning, meaning the heat gun would not really be needed for this project. So I took advantage.


Dont worry about over spray its vinyl wrapped


Turned out pretty good, will get the passenger side maybe this evening.

 

Dont I feel like an idiot.
My tires are not 17" there 16s.
Before I go searching my brains out any recommendations for a 16" tire 35 ish size.
To fit stock trd rims 16x7.5

Thanks.

 

you need at minimum 8" for 35s even 8" width is a bare minimum.

 

you can fit any 315/75/16 tire on the rim. It’s not ideal as you want at least an 8-9” rim. But the oem wheels hold a bead much better than aftermarket wheels. There are people running the 315/70/17 on stock 17” wheels which are roughly the same specs you mentioned.

believe @Norilsk is running geolanders if I remember correctly.

I have ko2’s.

 

Thank you, ill start the search.
Today was my final day trying to fit 35s.
Guess a little longer.

 

Thank you, ill start the search.
Today was my final day trying to fit 35s.
Guess a little longer.

 

Did you have a tire to work off of?

 

No but whatever I have to do I will.
Right not I have the snows on as I already separated the summers from the rims.
I'm getting tires no matter what and I think with the 2" body lift, cab mount chop, and 887's I should be all good.
If not I have a grinder and cutting disc

 

I can hear grinder and sawzall noise from the distance.
It's not the mall rubbing you shall be afraid of, but once on the trail...




in other news, in search of passanger side short bed fender with flares for 2016+ tacoma. Help me out

 

Question is, how you gonna frame and drivline chop yours for the short box?

 

3-link + new one piece driveshaft.

PS. I do have hammer hangers and relocation kit BNIB if anyone looking to upgrade... PM me.

 

looks like they are 2005-2020... sending PM. my medium Dakars should be fine but trying to figure out if I will be overly limited by my 5160s in the rear with the HH.