Eibach pro lift kit

Looks good mate, always did like the look of a white and black truck, I love my 265/75s (Wildpeaks). Thankfully they pooch out just enough to sit fairly flush to the aftermarket flares, hoping the 2" lift doesn't draw them in much (prolly not a noticeable amount). Kit should be here before the weekend, so damn excited!

 

I have been reading this thread since the Eibach kit looks like a great option - I would like to hear more about how it performs off road too.

I just had the Yokohama X-A/T 265/75r16 put in my stock truck and like them so far. They look good and from what I read should perform well. Not a lot of people have these that I found.

@71tattooguy what pressures are you running? I’m trying to dial it in so that I don’t kill the tires.

 

Awesome bro. I chose the other side for side wall pattern. Love these tires. I’m running 30 psi seems pretty good

 

Thanks for the reply - about 30psi is what my chalk test showed - I didn’t believe it based on everything I have been reading including tire charts. I was expecting 40 or more.

I think these tires/this size will look good with a 2” lift. I have been liking what I see here with the Eibach kit - keep the info coming! Only can read about it until the budget opens up!

 

Glad I went with eibach. My kit didn't come with the sway bar drop kit so I called Jared @ Eibach and they are sending a kit out for me. Great customer service. Thanks @Ryan at Eibach

 

Just wanted to keep you updated, I installed the tapered blocks I got on eBay and that took care of my vibes. Smooth as can be now. Here’s a link to the ones I got:
https://www.ebay.com/itm/283184710849

To clarify: I initially used 1.5” non tapered blocks for the rear and had some slight vibes, tapered blocks fixed it.

 

That’s how we roll. Thanks for the support.

 

Not the best pictures but I am more than happy with it so far. Amazing amount of bang for the buck improvement over stock on the road and on the one trail run I did this last weekend that had a good mix of crawling and washboards.

 

I got my Eibach kit installed yesterday. I gained about 2.25” lift in the front. Very pleased with everything. I’ve only put a few miles on it, but it rides much better than I expected. Once I get my wheels and tires on and have it aligned, I’ll post some pics.

 

@Ryan at Eibach, any updates on the 2020 Pro lift springs?

 

Nice bro. Look forward to seeing it

 

What's the spring rate in those coils? I keep hearing the OMEs have a lower than factory rate.

 

Negative. We’re still only about 50% staff so everything we were in the middle of is delayed.

 

I installed my lift this past Saturday, went with notch 2 because of my cbi hidden winch mount and Smittybilt winch syrup and HS 3 leaf AAL in the rear. The truck was fairly level but I didn’t like the lack of rake. My theory is that the winch combo setup I have is only about 100lbs so my front was too high. Anyways, I decided to put my over load leaf back in today and it cleared everything up for me. It was well worth it. Kinda hard to tell from the pics but I noticed. The rear measures 38 1/2” now. First pic before, second is after overload back in.

 

Another before pic, no after yet. You can see it’s a little nose high.

 

Great question for Ryan. I believe the stock Fox suspension has 600# springs.

 

742#

 

Made it off the trail tonight without breaking anything. Handled great and was very controllable over the rougher stuff.

 

Nice! Which trail?