1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Turbo BS Thread

Discussion in 'Performance and Tuning' started by Clay_916, Mar 20, 2017.

  1. May 8, 2020 at 4:38 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    What size is your flange? Most that I have seen made in this fashion, have had a T3. Mounted direct to the top. They may be ugly, but they are study and last.
     
  2. May 8, 2020 at 7:09 AM
    MadTaco461

    MadTaco461 BRO runner

    Joined:
    Dec 30, 2009
    Member:
    #28470
    Messages:
    13,399
    Gender:
    Male
    First Name:
    Mike
    CA
    Vehicle:
    99 turbo 5 lug long travel
    Kinda stock
    my old log I used 2x3 tube
     
    Bloodytaco208[QUOTED] likes this.
  3. May 8, 2020 at 8:32 AM
    dirtdigginjoe

    dirtdigginjoe Resident meth-head

    Joined:
    Oct 7, 2015
    Member:
    #166036
    Messages:
    811
    Gender:
    Male
    First Name:
    Joe
    Long Island, NY
    Vehicle:
    Paco The Turbo Taco
    GTX 3071r @8psi...
    A T3 would be perfect for a GTX3076R.


    Especially with this turbine housing from ATP. Fab up an open dump pipe out the wheel well area and BAM! Race truck. :burnrubber:
    [​IMG]

    But instead I have a shitty T25 manifold made of Ching-Chong-Chinesium. But I digress...lol
     
  4. May 8, 2020 at 8:48 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Never sustained a crack right? Not with all of that jumping?
     
  5. May 8, 2020 at 9:40 AM
    Bloodytaco208

    Bloodytaco208 Well-Known Member

    Joined:
    Apr 6, 2019
    Member:
    #289329
    Messages:
    439
    Gender:
    Male
    208
    Vehicle:
    Twisted steel sex appeal reg cab tacoma
    Bunch of built and bought mods
    Ill probably go t3 and get a conversion to t2 or make one. i havenrt decided. Yeah those little communist bastards not only spread the wuham wheezer but sold me a shitty manifold. Junk and junk. Im kindve in a pich right now thats why im building a log manifold, but once i slow down now that i have the flange layout i might build a couple better manifolds for purchase to help the 2tr community out.
     
    BassAckwards and Torspd like this.
  6. May 8, 2020 at 9:41 AM
    Bloodytaco208

    Bloodytaco208 Well-Known Member

    Joined:
    Apr 6, 2019
    Member:
    #289329
    Messages:
    439
    Gender:
    Male
    208
    Vehicle:
    Twisted steel sex appeal reg cab tacoma
    Bunch of built and bought mods
    T2 the old tiny t2
     
  7. May 8, 2020 at 9:42 AM
    Bloodytaco208

    Bloodytaco208 Well-Known Member

    Joined:
    Apr 6, 2019
    Member:
    #289329
    Messages:
    439
    Gender:
    Male
    208
    Vehicle:
    Twisted steel sex appeal reg cab tacoma
    Bunch of built and bought mods
    Yeah its 1.5 sch 40 pipe with an .5 manifold flange
     
    Torspd likes this.
  8. May 8, 2020 at 9:45 AM
    Bloodytaco208

    Bloodytaco208 Well-Known Member

    Joined:
    Apr 6, 2019
    Member:
    #289329
    Messages:
    439
    Gender:
    Male
    208
    Vehicle:
    Twisted steel sex appeal reg cab tacoma
    Bunch of built and bought mods
    Im also sick of that t25 flange, i want a v band connection so its easy to remove and install
     
  9. May 8, 2020 at 9:50 AM
    MadTaco461

    MadTaco461 BRO runner

    Joined:
    Dec 30, 2009
    Member:
    #28470
    Messages:
    13,399
    Gender:
    Male
    First Name:
    Mike
    CA
    Vehicle:
    99 turbo 5 lug long travel
    Kinda stock
    Sorry, 2x3 is the riser tube to the t3 flange.
     
    Torspd likes this.
  10. May 8, 2020 at 11:58 PM
    Bloodytaco208

    Bloodytaco208 Well-Known Member

    Joined:
    Apr 6, 2019
    Member:
    #289329
    Messages:
    439
    Gender:
    Male
    208
    Vehicle:
    Twisted steel sex appeal reg cab tacoma
    Bunch of built and bought mods
    Note to self: dont tig weld in a tank top
     
  11. May 9, 2020 at 12:23 AM
    BananaMan

    BananaMan Well-Known Member

    Joined:
    Sep 4, 2019
    Member:
    #304247
    Messages:
    8,273
    Gender:
    Male
    Bumfrick nowhere Maine
    Vehicle:
    06 2.7 RC 2wd manual "squattytruck"
    Little sun tan goin?
     
  12. May 9, 2020 at 12:52 AM
    RedLantern

    RedLantern Well-Known Member

    Joined:
    Dec 7, 2012
    Member:
    #92641
    Messages:
    1,765
    Gender:
    Male
    Honolulu, Hi
    Vehicle:
    2019 TRD Pro Tacoma - Voodoo Blue / 06 double cab PreRunner Turbocharged (sold)
    not_nick, MadTaco461, yota243 and 3 others like this.
  13. May 9, 2020 at 8:05 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Insta-farmer's tan for sure.
     
  14. May 9, 2020 at 8:05 AM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,618
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    Headlights are for suckers amirite?
    FB_IMG_1589036637918.jpg
     
  15. May 9, 2020 at 8:09 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    That engine just has a smoother exhaust pulse frequency than the 1GR. Sounds closer to a 370z, than our raspy torque pounder.
     
    RedLantern[QUOTED] and Sleipnir like this.
  16. May 9, 2020 at 8:13 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    That's sick!
     
    Sleipnir and yota243[QUOTED] like this.
  17. May 9, 2020 at 8:25 AM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,618
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    We have a '62 f100 that my dad started "restoring" 20 years ago. It has a rebuilt motor with like 50 miles on it maybe. And I just sent him that and asked if the headlights still worked haha
     
    RedLantern and Sleipnir like this.
  18. May 9, 2020 at 8:27 AM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,618
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    That 292 is already asking for a single turbo from the factory, cross over pipe goes in front of the engine over the fan, but I don't think we still have the factory exhaust but a pretty neat design anyway
    cd6e8f896afb68f14f21e0b61c158e71.jpg
     
    Last edited: May 9, 2020
    MadTaco461 and Sleipnir like this.
  19. May 9, 2020 at 8:49 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    :laugh:
     
    Sleipnir and yota243[QUOTED] like this.
  20. May 9, 2020 at 8:50 AM
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,296
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    It is neat, thinking about the engineering hurdles that they were faced with, to come up with that design.
     
    Sleipnir and yota243[QUOTED] like this.

Products Discussed in

To Top