Everything MOLLE BS

OP updated.

 

@lapoltba saw some of your posts in the Goose Gear thread. Why not get something like this? I actually have one, and Ill probably make something for a "floor" to my AC back seats. And you dont have to pay ridiculous prices for goose gear

 

...cuz. The goose gear seat delete is going to fit and look so much better. And someone else builds it for you.

 

Id rather build it myself or support a vendor on here.. The Molle panel that @docloco makes fits awesome and it does its job.

Just like the swingout table that I just made. Already had several people ask me where i got it - made it with my bare hands..

 

I'd love to see more pics of your setup. How much did it end up costing you?

 

Thats the whole table. The most expensive part would be the piece of stainless (it was given to me, so Im unsure of the actual cost. My guess is around $30), rivets, 1/2" aluminum L brackets, aluminum piano hinge, 1/16" stainless wire, aluminum eye bolts, and some aluminum ferrules. My guess is around $70 including the stainless sheet.

Started with a flat piece, bent up 1" around on 4 sides. Riveted in the L brackets and hinge. Then a couple months later when winter passed, added the stainless wire

 

Nice!

 

@wmg you need one of these!

 

this will be my first mod. (2007 taco) how do I put in an order?

 

I’ll put you on the list, which is on the bottom of the first post.

 

I was falling asleep looking through the 195 pages to see if anyone addresses the cabin pressure vent in a 2009 access cab lol. I'm interested in the GB, but not sure how I would accommodate that issue. Anyone figure this out and could shed some light on this for me before I jump in?

Thanks in advance

 

What do you mean by addresses? Leave it in place, deaden around it, put something in front of it that can block the sound. I'm working on a different solution than the one I have now, more of a tunnel away and down to redirect the noise. Still in the planning stages in my head.

 

I don't have a regular cab to take measurements from, so I can't say definitively if it would work or not with an existing panel. If I had someone local to me with a regular cab who was willing to let me take measurements from the back of their truck, I could design one specific to regular cabs.

 

Spell check fail on my part. I meant "addressed". I was asking if anyone has come up with a good solution for the cabin pressure / road noise situation. Covering that vent too much can lead to some issues.

 

In for #22

 

I'm interested in an access cab version. Could you send me info?

 

I'll put you on the list. 99.99% of earthing you want to know is on page 1 in the original post.

 

thank You

 

@docloco found another picture from when i had installed mine. 2010 AC

 

What do you have for the flooring there?