1st Gen Lunchtable Thread - General Discussion

Fucking lol, this is gold

https://youtu.be/sYaNZGXihIE

Thieves try to steal a bike with a long cable attached to the railing, they start riding away and hilarity ensues

 

Part of me says its staged cause they would have had to walk by a dude holding a camera aimed right at the bike

Other part says who would willingly do that

 

Why do the best ebay deals always pop up on the weeks that bills are due?

 

Hopefully they are able to come through

I haven't been to my office since the start of March and now it's sounding like the end of summer before I'll be back.

 

Hobo tweaking drunks.

 

So uhh that gear set they got me.
8” CLAMSHELL.


Doesn’t fit an elocker. Damnit

 

4/5 reverses and a forward sounds fun

 

Huh?
They got me a 8” reverse ifs 27 spline setup.

 

Ok guys. Ohmed out the cam sensor and it’s in range. Lost for words. Just gonna get in touch with my buddy and use his smoke machine. Idk what to do anymore. The only thing I can think is I cleaned the MAF a couple times and it could possibly be damaged. Thinking about just ordering one and see what happens

 

I know i was just being sarcastic

I was just saying if you could install a reverse rotation in the rear

 

How bad of a stutter is it?

 

Oh. No. The pinion is massive compared to the elocker pinion.



the ring fits the carrier though. Totally didn’t put that ring gear on before realizing the issue....

 

Injectors?

 

At idle it’s rough but with throttle gets better

 

Sounds like my camry and the accord i had

 

Injectors sound fine. Listened to them with a stethoscope and all sound fine but doesn’t mean that they could be clogged. I’m running some injector cleaner through the gas now. Either one is clogged or MAF is all I’m left with.

 

I went through it with the tacoma, injectors were all firing fine but after replacing it ran great with a totally random ass no rhyme no reason missfire

It was the injectors' connectors terminals that wernt making good enough contact with the pins in the injectors

Had to cut and splice new connectors on and misfire fixed

 

Vacuum leak
Hold up, so gets a lil better with RPM but still skips? Or completely gets better at RPM?

 

Adding rpm it gets better. At idle it’s rough.