What Have You Done To Your 3rd Gen Today?

LOL That's good gun.. I was messing with RivetNutBob about riveting the nuts that squirrels are mad at him for breaking the nuts that squirrels have been saving nuts for the winter.

 

Hi Lance, I did a trial run plastidipping my fender flares with a couple of coats and it turned out well. Later on, I installed the Morimoto XB headlights and redid the flares off of the truck during that process and they have held up very well. If you do decide to pull them off, get a set of replacement clips as you’ll likely break half of them in the process.

 

If you have a heat gun it reduces the dry time to almost nothing. Think mine was like $15 at harbor freight. Waited no more than 5 mins between coats on my badges, and maybe 10 on the last coat before peeling. Using the heat gun on low (being very careful not to over heat).

 

Added LED lighting W/ DRLs and ditched the chrome. DRLs are powered through what used to be the parking light harness.

 

Sorry, can't hear you over the sound of that Charger idling... do what?

 

Post up some pics of the Charger...

 

Nice, does it switch back with the blinker?

 

Congrats!!

 

Don't want to start too much of a tangent...

Appreciate the interest though.

 

Yes it does! Headlight handles all that internally.

 

I want

 

Thanks for the tip; have a heat gun so trying that out on the fender flares shortly

 

My 2019 was a 17", matched the rest. Just had it removed and replaced with a Wildpeak to match the other four new ones. Sounds like your dealer may have screwed up?

 

Threw Some K-Bro's on.

 

That's awesome, I know a lot of SR and SR5 people have been trying to figure this out.

 

Looks nice. Those wheels look so much better than the 2019s.

 

I'm not taking them off now; just taped everything up. Installed some LED's headlights last night - crazy that there's LED DRL's but not LED headlights.

 

Yeah well I went there right after and they said they didn’t. They’ve never f*cked me before and are always good so it’s all good. Plus now I’m not spending an extra $180 on a 5th tire

 

Not too much trouble. You do have to find the right connector housing and re-pin some wires. If enough of you guys are interested I could put together a how to thread.

 

disregard, fat fingered....