Let’s see some subwoofer setups!

Running a custom box fits behind the seat , 13.5 inch shallow jlw sub

 

I had a 10” JL in my 08’ (DC) with a 5 channel running all four (six with tweeters) door speakers and the sub. I actually miss it and am in the process of going back to something similar. I think two would be too much, but a single gave me a good balance. It was easy to adjust the bass down if it was too much or turn it up if I needed more.

 

Take an honest look at what you listen to 90% of the time and go from there. If you listen to nothing but rap a single sealed 8 isn't the best choice, just like a ported 15 isn't the ideal candidate for someone who listens to bluegrass most of the day. Dual sealed 10s is doable if you're willing to lose all the storage behind your rear seat. And the right 10" sub paired with the right amp (and box) can damn near play anything you toss at it.

Do you need two? Only you know.

 

I think I might have too. The box for the 2 10's is only 40$ more than 1 sealed box plus it has a nice place in the middle for the amp. Think I'm going to run 2
JL Audio 10W0v3-4.
I haven't used the back so far so I'll probably never use it.

 

I recently went from one 10” to two. The low end was so much more full with less amp gain. Had 8.75 Dyns in the front doors and just squeezed 9.25” Dyns to replace the 8’s.
No. I don’t believe it’s too much, sounds just about right. Plenty of output with no distortion.

 

No. I've sacrificed at least 2/3 of my xcab (everything removed and rear wall rebuilt) and it's almost enough . OK, it's enough, but headroom

 

You know the dimensions by any chance?

 

Little late to the party here ya go

 

Not in a Tacoma but in jeep Grand Cherokee I had a few years ago. 4 Sundown SA12s, Crescendo BC3500 amp, 3 XS Power batteries and a 300 amp alternator

 

OMG. I hope that wasn't just for cruising and getting noise violations??
Win any spl contests

 

I dont have them, but the box is about .5 cubic feet. I used cardboard to make the shapes of the front, the rest of the box is pretty much square.

 

Lol it was an awesome setup and I ended up getting 2nd place at the Midwest SPL. It was BS i ran 3 times first run 148DB, 2nd run 151DB and in the finals I ran a 149 and the other guy did 150. I was a bit salty after doing a 151 and getting beat by 1 db

 

Nice setup any cutting to the plastic ?

 

Yes nearly all of it just left the clips and bezel

 

No pic in truck. But the box is from Mr Marv. Amazing build quality and fitment. 10" JL 10tw3 powered by a alpine pdr v75.

 

Is he still making boxes? I don't see him active here or social media.

 

yea he is. You just have to call him as he’s just busy to be active

 

Two Punch p3 Shallow mount 10's powered by Power 500 mono amp.
Punch 450.4 powers front and rear door speakers. Rockford T2 6.5 comps in front, FNQ 5.25 comps in rear.

 

Picked up some new toys today.

 

Like ur style everything I have in my truck is RF Power