Raptor Light Bezels for 20-21 Tacos only!

Designed here 1st! These are for the bezels only. Lights not included.


Back in stock. Originally on TW. These fill the gap, and you won't see the void from the typical "pro raptor lights". These are made for the 20-21 Tacos, are 3D printed, trimmed, and shipped here in California after a hard days work by a local electrician Thank you!

LINK:
https://www.etsy.com/listing/787871..._gallery-1-4&tr_rank=4&organic_search_click=1






3D printed light bezels for the 2020 & 2021 TRD Sport and TRD Off Road OEM grille. Designed and 3D printed by my brother and myself here in the USA. These bezels are great solution for people who want to install raptor lights in their 2020 & 2021 Sport/Off Road grille.

These bezels work with the common amber or white LED Raptor style lights that fit in the TRD Pro grille as seen here. LIGHTS ARE NOT INCLUDED - BEZELS ONLY (you will need to order the lights and fuse separately, see post #7 for a link to the lights).

FITMENT:
2020 & 2021 Tacoma TRD Off Road and 2020 & 2021 TRD Sport Grille

PRICE for a set of (4) bezels:

$66 + S&H

Link to buy here:
https://www.etsy.com/listing/787871...ted-raptor-style?ref=shop_home_active_3&crt=1

 

Thanks to everyone who has ordered! Only 1 left in stock! (edit: stock updated!) But, we will print more for anyone else interested in buying.

On a side note, I ordered a step down module from

KNACRO DC-DC 12V to 9V 2A Step-Down Power Supply Module Car Power Converter Module Synchronous Buck with Reverse Connection Protection

here to dim the Raptor lights as the white ones are a little bright. I'll post results after the instillation.

Here's how they currently look at night:

 

I installed these on my 2020 Sport. The Raptor lights snap into the Bezels, just fine. I added some silicone just to be safe.
The bezels push in from the front and snap into place. I used a plastic trim tool to push them into position. I didn't want to mark the grill or the black bezels.
Very satisfied and would recommend. Now I just need to figure out how to wire in the Raptor lights.
That's a whole other story.

 

These are sleek. I wish these were around before I opted for the pro grill

 

Thanks for the pictures, Mickeydog!

As far as the wiring, although not 100% confirmed, I'm confident I'll be using a

ABN Mini Fuse Tap Holder & 15A AMP Blade Adapter - 2-Pack, 12V Add a Circuit Kit

low profile mini add-a-fuse at the INJ fuse in the engine panel as shown here, I'll wire it to a switch inside the cab, then to a 9v step down module

KNACRO DC-DC 12V to 9V 2A Step-Down Power Supply Module Car Power Converter Module Synchronous Buck with Reverse Connection Protection

here, as mention previously, and then to the lights. This way, I'll have them light up with the ignition, but have the option to turn them on/off at will, and they'll be dimmed, so they don't throw out too much light.

Thanks! We've actually been working on them for quite some time. If you decide to come back from the dark side, let us know, and we'll have some nice bezels lined up for you.

 

Can someone link to the specific amber raptor lights that work with these?

 

@Taco_Cabal shared his experience (w/ more pictures) and the lights he purchased over here, but similar ones can be found for less. They typically have 3 styles of lights, amber-amber, smoked-amber, and smoked-white.
Edit: some have been having problems with these lights:

$26 iJDMTOY 4pc Set Front Grille Lighting Kit Compatible with 2016-2023 Toyota Tacoma w/TRD Pro Grill ONLY, Includes (4) 4-SMD 2500K Amber LED Light Assy & Wiring Harness

https://www.amazon.com/dp/B07MVT9S78/ref=cm_sw_r_apa_i_1bRVEbY3VS3M0

 

Hers my DRL/Headlight set up.

 

I have been looking for grille lights for my 2019 Sport? Any suggestions ? Most lights say they fit the PRO only.

 

I'll let you know if we design a set. I have a buddy with a 2019 that we can measure up.

Otherwise, you might want to try these: https://www.yotaleds.com/product/tacoma-led-grille-lights-sport-offroad/

 

Thank you kind sir!

 

No problem!


We currently have 4 sets of bezels in stock for the 2020 grille!

 

This is the grille on my 2019 Tacoma Sport. Which, if any, of the above raptor lights will work? These have vertical "honeycombs" where other models have horizontal.

 

Sorry, our bezels will not work on the 2018 & 2019 style grille. I switched my grille from a 2019 to the new 2020 style, and we designed the bezels for that grille only. We'll let you know if we design something for the 2019 grille.

As far as I know, YotaLEDs is the only company that makes raptor lights for the 2018 & 2019 style grille. Their website is here. GL!

 

Thank you. Out of stock (and a bit expensive).

 

I didn't even know that someone made Raptor lights that fit into the 18-19 grilles. Good thing I didn't see it earlier or I might have gotten them! I'm looking to trade my 19 in for a 20 here soon though, so I don't want to sink any money into it that I can't move over to a new one.

I might think about the ones in this thread when the time comes, but I prefer the look of 3 lights vs the 4. Are you making a version to fit in the top 3 "half spaces"? I've seen this picture on Reddit's Tacoma sub, but not sure who makes them or where you can get them.

 

Got it. I guess only the white ones are in stock.

Thanks for the picture! I really like the 3 lights too, and discussed them with another member on here when we were designing our bezels, but the 3 lights require drilling into the grille, and some owners probably don't want to do that because of re-sale value, etc. The OEM grille will need to be replaced if they ever want to bring it back to stock. We are considering making an insert, with lights, for those top 3 spaces, but the owner will still need to drill a hole.

 

got to pay to play brotha

 

With your current mounts, could you instead use the 3 holes below the Toyota symbol then for a 3 light setup? Of course, I don't think that will work for people with the panoramic/360* camera system as that center one is where the front camera goes for that. And I plan on getting that on my '20, so wouldn't work for me. =( But maybe for some it might. I prefer not to drill either, but maybe I would make the sacrifice if I really get the bug for them!

Btw, so do you know who sells the ones in the picture? The person who posted it on Reddit could figure it out either and nobody responded with an answer.

 

Sorry, I don't know who did the lights in the Reddit picture. Edit found here. Actually, this is the first time I've seen it! The lights look similar to

$14 3pcs Bumper Grille Flare Light Kit Compatible with Ford Raptor Style (4-LED 3528 SMD, Amber)

these.

But, I do like where this is going! Our original plan was to have a universal bezel that could fit in multiple spots, but we found that there are slight differences in each spot (pm me if you'd like to see pictures). So, for now, we can only confirm these work in the top four spots. I'll let you know if we design more options. For example, bezels can be designed to match the layout (or, light style for that matter) as seen

Z8LED Grille Amber Lights Compatible with 4Runner TRD Pro Grille 2014 2015 2016 2017 2018 2019 4 Pcs LED Lights…

here.