What Have You Done To Your 3rd Gen Today?

Added Tufskinz taco sauce overlay.

 

I hate to tell you guys this but the more room you have the more junk you accumulate.
Trust me. 3 vehicle carport, 2 car garage, and a camper garage big enough for 2 more cars. I still don’t have enough room for everything. I know, first world problems.

 

Link plz

 

https://www.tufskinz.com/product/fu...auce-only-fits-toyota-tacoma-2005-3-piece-kit

 

Thanks brother

 

My garage has about 1 or 2 ft deep (I don't remember) and about 3 or 4 ft wide wall around the pipes due to the kitchen which is next to the garage. The stove is other side of the wall from garage. I am sure there are water line and drain pipes in that wall.

I am considering to move kitchen to other corner of the house and move the wall out about 2 ft.

I'll see how much all that crap figured cost then go from there.

My wall is next to the kitchen is like this:





This sucks. I know cost a lot to move pipes and all. So we will see. If I don't have that part attached to that wall, I am sure my truck would fit really tight. I want 2 ft more.

 

Plasti-dipped the badges and fender flares. Flares came out perfect, the badges have a couple tiny spots where I scratched the dip when peeling it so I ordered some overlays for the badges. Anyone know what works best to prevent the dip from scratches? Would a ceramic wax help?

 

Smoked Raptor-style LED lights from Amazon. Easy plug and play.

 

Added the OEM bed step today. Easy 15 minute install. It was hard enough for short me to get in the truck before the lift, but then after I lifted it, no bueno!

 

Use pex plumbing. It’s relatively cheap and easy. Check in to it.

 

The extra height was big for me. The redlines are lower than just using the bar. I touched up the holes and since they are covered I won't see them. More because I could than anything to be honest.

 

Thanks, I may try those. Due to my unusual mounting situation I had to reach out to Spyker for options. Leon replied back to me at 10:30 pm and continued helping for more than an hour. I am more than satisfied with Spyker customer service.

 

I know about those.. I do carpentry/home remodeling. I installed a waterline with pex today for customer.

 

I know what you meant. The hood open height doesn't bother me. At least I am able to grab the hood to close it.

 

Just got my ome 887 coils paired with 5100s and a rear AAL. Not sure if you should do the diff drop or ecgs bushing at the same time. What do you guys think? Is it necessary or just if I get vibrations.

 

Today was the day. After a new setup, RTT plus motorcycle on the tow hitch, the truck was sagging and hitting the bump stop with weight. after talking with a fellow TW member, we came to the conclusion that the OME complete suspension setup was the way to go. The install was time consuming but fairly simple. Just above 21/2 in the front and just under 3 in the rear. Very happy with the outcome and the ride!!!

 

In my experience, just making sure you clean the area well before applying it and putting at least 4 layers on does the job. Ceramic coating usually just protects the color/shine but it might work?

 

Price you paid????

 

is that an RCI rack?

 

Now I'm looking at co!or coding my gas cap.