1st Gen Lunchtable Thread - General Discussion

Spider web farm*

 

I spent $21,000 on tools last year. Oof

 

@BartMaster1234

https://www.instagram.com/p/CAROK6RJvsn/?igshid=1uz38yssn8gv0

 

Should've known better than to try going into home depot on a Sunday

 

can you flat rate the frame? lol

 

so pulling 4runner engine and stuff apart.. do i bother putting new contacts into a reman starter or just use my original starter from my truck? and the alternator is the 70 amp model.. new brush and use it? or use my shitty reman 80 amp?

 

Yeah, ours is so bad even during the week.

Lowes is almost as bad with foot traffic.

 

I can hear the wheel bearings screaming from here.

 

Got right in with no line, then realized I forgot the bolt I needed to compare/replace in my truck. Went out to get it then there was a huge line to get back in lol.

 

I stopped going to Home Depot for hardware. Their bolt bins were always not stocked and misorganized. Ace Hardware is way better for nuts and bolts.

 

Should've just bought multiple and returned the others at a later time.

What bolt did you replace?

I remember having to go to Ace for my front leaf spring nut.

 

Sooo @BartMaster1234 im actually working on something for the truck. (Granted it’s a temporary engine)

 

Yep that's why I always bring the bolt I'm replacing with me, cause their bins are always unorganized. Home Depot's grade 8 section is pathetic so I go to Ace for those

Just needed a few bolts for my tail gate swingout cause the other ones were rusting, didn't need grade 8 for that

 

Same in my case; Ace is better overall for bolts.

 

The ones on my tail gate swingout are rusting, not sure what kind they were but after one rainy season they looked terrible

 

Totalled

 

crusty

 

There’s glass everywhere on it. Charcoal from the canister exploding. And oil everywhere from valves cover leak

 

Ace is crazy and had some weird obscure JIS bolt I needed. Apparently M13x1.50 is just normal metric hardware, but M13x1.25 is a rare JIS only size. They had just enough JIS bolts for me to install the bumper into the stock tow hook location.