2015 Taco Bed Not Sitting Level

Hi all,
Super new here but I have been browsing the forums for a little while. I recently bought a 2015 Taco with 26k miles and recently noticed that the bed is not level with the cab of the truck. You can barely tell by looking at it but somehow I managed to notice it and now I can't unsee it. It's is the same on either side of the bed, not angled more on one side over another, Is this cause for concern or am I being ridiculous about this? Thanks for the help!

 

From what I read (no expert), there are 4 to 6 bolts in the bed that hold it down to the frame. You may want to remove 1, inpect it and make sure it looks normal and is in the frame securely. That would mean going under the truck and bolt removal to see if anything is wrong. Register your Toyota here: https://www.toyota.com/owners/register and look through the maintenance history to see if anything was done to the truck, including a frame replacement.

 

Damn now I am going to have to go and look at mine....

 

Thanks for the tip! I just registered and everything looks to be routine maintenance, so I suppose that’s definitely a plus.

 

It certainly weighs on the mind once you notice it lol