South Carolina BS thread under new MANAGEMENT and lives in SC

If yours are boat anchors I wonder what my 315km3’s are?

 

That's to fit what size tires???

 

Looks like 315/75/16

 

Bingo.
315s for now. Not forever.

 

Got finished right before the rain hit all fenders are finally done. Now On to the Inner fender liner Chronicles.

 

Since I have the HS 3 leaf AAL that came with ubolts, if I add a 1" block to the rear, would I need longer ubolts? Or any issue using the 5100s?

 

I just aquired a whole lot of stuff for sales

 

Whoa

 

Are you going to have it all broke down with prices in a for sale post?

 

I will eventually taking care of friends and locals first.

 

Here is everything I got
Keeping as of now:
TG twin stick and crawl box set up
ADD delete for front diff
Inner fender liners for 1" BL
Extra arb locker line
5qrt Castrol edge platinum 5w-30
2 qrtd Lucas 85-140 gear oil
URD MAF calibrator
Looks to be a O2 simulator also
What looks like some sort of tuning software
4 37x12.50r17 Super Swamper Iroks
4 Allied (raceline) steel bullet holes headlock wheels
Spare rear axle assembly complete with backing plate brakes and bearing ready to trail swap if broke

Up for grabs but some things I'm reaching out to certain people first:

1"body lift SOLD
Non body lift inner fender liners (Paul wanted these, haven't seen him in forever)
Some allpro bumper light bar mount thingy $35
ARB twin compressor with slee Offroad mount SOLD
BAMF shock relocation needs hardware. Pending
12" Fox RR factory series Pending
Fram oil filter Free 99
Iggy switch panel with ARB switches and some others $45
ATH bed corner gussets (needs t-slot hardware) @McRib
ATH bed stiffeners (needs 3/8 bolts for bedsides) SOLD
Bussman (I have 2 to choose from one I'm keeping) and 2 different bussman mounts $50
Archive Shackle flip $300
Red Goat Fab cab mount relocation @McRib
XRC 9500 winch with new syn cable and hook (needs bolts and nuts to mount it) $225
2 No name 1.25" wheel spacers $25
RCI gas tank skid SOLD
Prinsu fairing cut for light bar (not sure of size, I'll look into it) $40
And lastly a modified what looks like metra radio deal but with a Soundman mini iPad deal 12-15(if you're into streaming music and audio stuff these are the shit look up Soundman on the YouTube's) $10
ARB Snorkel $350 (needs template)

I think that's it

 

ARB Safari Snorkel template.

https://www.tacomaworld.com/threads/the-beer-build-and-bs-thread.503146/page-11#post-22999167

 

I think I have some blocks in my shed somewhere, free fiddy if I can find them, and you'd need new u-bolts. I picked up some 10" u-bolts from Headstrong when I was running these blocks for less than 50 bucks, but they had to be trimmed down pretty good.

 

Yah me and the possum had to trim his down about 1-1.5” last week. Easy peasy

 

Be interested in the tires . Only if that snorkel fit a 4runner

 

Naw man that's on the keep list

 

Ahha I know . But I'd be interested in the winch tho . Does have the fairlead with it too

 

Naw it doesn't those are cheap. though unless you want that fancy factor 55 stuff. You'd still be in it for under 300

 

Get the winch, I’ll grab it from him and bring it down in a few weeks.