I shorted something - what fuse could it be?

Long story short, I was soldering the gray wire marked switched ignition in the image. As far as I can tell, it shorted out on the soldering iron. There was a tiny spark when it occured.

Hopefully it's just a fuse. I checked the radio fuse and it's fine. What else could it be?

 

What's not working?

 

Oh right. Just the radio as far as I can tell. Now power to it

 

Replace the fuse to be certain

 

is everything with your ignition still working?

 

Replaced. Still now power

 

What else doesn't work? Start and run ok?

 

Starts fine. Everything seems ok. Just the radio.

Using a multimeter, there is no longer 12v going to that wire.

 

radio fuse in the engine compartment?

 

That was the one I checked and replaced. It was fine.

 

Is there a fuse on the radio itself

 

there are a few of them radio 2 on the bottom left hand corner when facing the fuse box from the drive side fender kills all the power to the radio

 

U checked the fuses under the dash too right?

 

There ya go

 

Thanks guys. It turned out to be 7.5A fuse under the dash.