Ontario BS Thread

How do you guys like the General Grabbers?

 

Speaking of.tires........ fiiiinnnaaallllllyyyyyy.



Big shout out to 4wheelparts.
Thanks guys.

 

Pfft, yo

Ripe for the asshole parking thread lol

 

doesn't look like procomp 7069 series rims. what did you go with? how is the clearance with the brake calipers?

 

Procomp 69 series lots of caliper clearance no worries there.
But -6 offset just squeaks by the uca when the wheel is turned and is about index finger clearance going straight.

 

What’s the back spacing? Usually 4.0 to 3.5 for 35’s.

 

4.75 I think.... yeah it 4.75

 

Got it. Yeah the go to for clearance is 4.0 and lower.

meh as long as it clears. Can always run spacers and be good to go. 1” spacer would put you close to me. I’m at 3.5 bs and -38 offset. Not ideal but it clears shit.

how’s the cab mount?

 

I had to cut mor like you said.

Waiting to take it offroad and stuff it .
Just in case it needs more.

So bilstein 5100s bottom clip 887 coils
And an2" body lift
Cmc and pinch weld.

Hopefully all will work well

 

Add delete is done. So now there is no electronics in the 4wd system. Trucks driving and all is good so far. With this setup the front driveshaft spins with the front wheels and is simply is in neutral at the tcase. Makes greasing the front driveshaft a bit harder but will be replacing with non greasable ujookt down the road.

 

Alignment may help to. As much faster as possible! But for me it was 3” off the fenders, smash the wheel wells, and then cab mount chop as much as I could. Will be doing cab mount relocation down the road.

 

Now atnour next meet I'll.actually understand what I'm looking at when it comes to trucks like yours and

I always see these emojie with his posts......
Lol. Its true
Norilsk..

 

As long as it works who cares lol. Just needs to work!

 

Are you guys talking about the best tires ever created? I think the Coopers don't get enough recognition for the aswesome tire it is. As long as they keep making them, I'm buying.

 

Best tires I've owned were the goodyear mtr, the old style.

But ill just say worst tire ever made are the thornbirds, interco

 

Dirty5s are the new 33s, 33s are now tires for minivan moms and soccer dads...
Here I am, dreaming of 40s... the new 35s...

If you plan on lot's of HWY I would go with the Geolandar G015, I beat the crap out of those tires on trails at low pressure and rice purrarri and purracan's on 400 series at "license suspension" speeds - those are my choice of tires

They do corner really well every time after I re-watch "Tokyo Drift" movie too

Welcome to the big boi club!

 

Sounds like u have the same amount of clearance/ rub as me
Im runnin 5100’s with 883’s(pretty sure)
295 Cooper stt pro’s
same wheel spec

 

ah yeah i see that now, i couldn't see the caps on the barrels there, Mikey Thompson makes a similar rim and that's what i guessed you went with

I run the same style of rim in a 16" from procomp
https://www.procompusa.com/wheels-p...=2336-1558-1551-1557&pqa=13671-8275-8057-8268

 

That would of been perfect. But in a 17" they did not offer a -12.
Oh well it's done now.

 

hope they gave you the right price this time, glad to see it all together