Colorado Trading Post

2' 11.5" tall. It's hip height on me and I'm 5' 9". I'll update the post

 

Hey guys, going to be having for sale here soon some Fox 2.5 IBP's and 2.0 rears. Gonna need your help though on figuring out a price on the fronts though since there isn't a part number for them. So don't ream me if I'm too far off, this is just what I'm thinking. Closest you can find is the Fox 3.0 IBP 883-02-046 but for Raptors. Either way let me know what you guys think. All were just rebuilt and only have less than 100 miles on them to test them out. Let me say, that aren’t bad. Let me know what you guys think. Here’s the deets:
Fronts- 2.5 extended length Coilover measures just under 22.5 inches. Rebuild has new seals, retaining clips, cleaned up and coated with steel-it black coatings. 13x600 springs and new upper and lower bearings and spacers. Mounting hardware included. These do not have DSC. $2100

Rears- 2.0 older style piggyback that mounts from the bottom. New seals, oil, 1 new shaft, and 2 new reservoirs, and new fittings and bearings. These are steel bodied and quite a bit more durable, but closest is the new 984-24-116. These are for 0-1.5” of travel. One is missing a sticker cause Kartek missed one in my order. I can get another one or take them as is. $250

$2200 for fronts and rears together.

Full disclosure: I got these in a trade and rebuilt them myself. First time ever, but also took me a few months to do so to make sure they were done right, also with some good help. They hold full charge and have no leaks anywhere and ride smooth. Figured I’d let CO guys take a peak and see what y’all think.




Also, this is what they looked like when I got them...

 

$80 front and rear WeatherTechs for 3rd Gen on Craigslist: https://denver.craigslist.org/pts/d/littleton-weathertech-mats-toyota-tacoma/7127943559.html

 

@upTOPoverland will set you up good, local too

 

@tvo303 Our bravo lineup is $599. Stonger, lighter and larger than both of the options you mentioned. We are local too

 

I will be out of the country in a couple weeks, can you make it down here before the 7th?

 

Wish you had the Bravo for an '18 Access Cab! Needing a prototype test vehicle?

 

Most of the tabs are intact

 

3.90 (IIRC maaaaaybe 4.10) 7.5" IFS clamshell. Was keeping to build a spare front third but I changed my mind. $125 obo




Following is free stuff Off My 1st Gen before I throw it in the gutter for the scrapper

Sway bar



front rotor cores, front caliper, inner fender liners, spare 15" wheel, bed liner with some cuts

 

Sweet. I’ll take them.

Where and when do I find you?

 

Hey Wulf, I'm also interested in the hitch (Assuming still available, hence the sticker pic). Located in DTC so not far from where you're at.

@Comtnyota89, you still interested?

 

Meant to respond to this but forgot...I appreciate the help. I think I am going to take it apart this weekend, clean up the crack, and try some aluminum brazing rods from HF. I have never done it before but I watched a few youtube videos on it so I'm basically an expert now.

 

One of y'all please come pick it up. Couple minutes from Buckley and Smoky hill


if I am feeling nice I might even try and detach it from the the bumper for you

 

SE Aurora/Centennial. I may be able to bring them up to boulder sometime next week but no promises on whether I am making the trip yet

 

First come, first serve...? Could take it off your hands later this afternoon if you'd like - no need to detach.. unless feeling nice. Work in the Parker area and off around 4 Just let me know. Also available tomorrow as well

 

Sure. I never heard from him after he asked for location but his profile says he's been online since

 

WTB lowboy gooseneck with drive over fenders <=24 feet

 

I thought you dealt diesels and trailers. You don't already have that setup

 

no and no

 

also free

front rotor cores, front caliper, inner fender liners, spare 15" wheel, bed liner with some cuts