For sale: BlaisBrosTacos Diff Breather Mod Kits! - $35 - Free shipping or free install!

I’d like one please

 

Just hit the mailbox this afternoon.

 

Send a PM to order

 

PM’d.

 

Pm'd him and the kit came really quick and I'm on the other side of the country. I had a 4Runner I put a diff breather kit together for and this is way better, get all the parts shipped right to your door.

 

Awesome! Thanks for the pictures! Mind if I post these on our Instagram page? @blaisbrostacos

 

Sure thing, feel free.

 

Just installed mine. Used every bit of the hose provided following the brake lines to insure plenty of slack. Little squirt of white lithium on the new breather helps the hose to slide on, that was about the hardest part of the whole operation.

 

Okay so I installed this kit today on my 2019 SR5 but ran into a little snag and am looking for advice.

When I ordered, i didnt realize that my SR5 has the cubby the right and most folks doing this mod with their TRD off roads have their cubby on the left.

I ordered the standard 5ft length of tube. It does not reach my cubby on the right, nor behind the tail light.

Currently I have it zip tied up into the frame but only gained about 6inch of height max.

How are yall attaching it next to the gas cap? Any other ideas on where I can run the tube and attach it?

I appreciate the help

 

Does the hose have enough slack to reach up behind the tail light and do you ship to Canada?

 

I just installed mine and had to add 2 ft more hose to reach the taillights location. I just went to the hardware and bought more hose and an connector with some clamps.

 

I mean all I really need is the union. My Toyota dealer has the plug in stock but the unions are on back order so ...If I knew what size to pick up from a hardware store that would be great. Shipping to Canada might not be reasonable these days either way

 

Hey for an extra $10 I have an 8ft option, but it does cost an additional $15 to ship to Canada. Your total would $65. Let me know if you’re interested.

 

$65 USD is over $90 CAD. If I was in the US I may have ordered the kit. it costs about 30 loonies to put it together here!! Just need the size of that thread going in the axle. I might just pull out the breather and match it

 

I have an extra “hardware box”

it has the fitting for the diff, the hose clamps, and the breather. If you want just that let me know and I’ll work with you.

 

I'd be interested in the hardware box, or one like it, if @Jazz1one is not. I'd like to get a custom-length fuel line...

 

How long? I can probably do that too.

 

That's the thing - I won't know until I get under there and determine where the end location will be. If you're willing to just send the hardware without the fuel line, that would be great. If not, I'll have to get under there and see, then get back to you with the length. I'd prefer just the hardware if you're willing.

Gary

 

Would the 8ft option for an additional $10 come with free shipping in the U.S.? That would probably be more than enough. I'll have to measure, the 5 ft may also be enough to reach the tail light...

 

I actually have to ship it flat rate if you go with the 8’ option so it would be $42 total shipped.