285/70r17 and spacers

Hows it going i was just wondering if i could get some opinions on my truck. I got a set of 285/70r17 cooper STT PROs and i wanted to mount them on my stock tacoma rims but the 5in backspacing is too much. Tried to put 1.25in spacers but the spacers i ordered wasnt able to bolt on to the rotor because the studs on the rotors were too short to bolt on too. So my next option was to buy rims. Ive been looking at these rims that have a backspacing 4.75in with a offset of 0, i was wondering if i can run this setup without the spacers?

 

Which spacers you running?

 

I bought ZY wheel spacers. Off Amazon never heard of the brand but thought all brands were pretty much the same.

 

I run spidertrax 1.25” hub centric spacers excellent product. No issues.

 

I came across this problem the spidertrax never had this problem?

 

No not at all. Spidertrax are well known I spent like 280 on them.

 

Oh right on ill look into those then. You never had to change your studs to longer ones? Or stayed the same. And also with tires how was your clearance?

 

I used them to give more aggressive stance on my stock off-road 16’s. Lots of guys run them with 285’s on stick wheels with lift of course

 

Lug nuts with an extended shoulder is what you need to run those particular spacers on the stock Tacoma studs. The last two pics show the difference.

 

Thanks for sharing those! You know where i can pick up those lug nuts?

 

12mmx1.5 ET(Extended) Lug Nuts for 6 Lugs Aftermarket Wheels Only, Dynofit 24pc M12x1.5 Open End with 7mm Shank Lug Nuts for Toyota with Conical/Cone Seat, Special Lug Nuts for Spacers

Dynofit 12x1.5 Extended Open End Lug Nuts for Thicker Wheel Spacers, 12mmx1.5 ET Wheel Lug Nuts for aftermarket Aluminum Rim,7mm Extend Shank Tuner Nut Compatible With Toyota Tacoma Tundra

https://www.amazon.com/dp/B07DN4FX21/ref=cm_sw_r_cp_api_i_egd1EbH08E7D7

 

Thanks man for the help just ordered them.