TRD Pro Desert air snorkel?

Donkel =









Just kidding.... Anyway welcome OP, there is some legit info on TW, good people, and great entertainment

 

that's exactly how I read it....lol

 

Don't know where you found this info but thanks a bunch !!!

 

Your welcome, hope it works out for ya... post pics of the

 

Thought I would update you on the snorkel. I got it yesterday opened the box, all looks great, BUT, no template !!! GREAT.. How lucky do I feel cutting into my brand new truck with no template. I can not believe they don't come with a template. Dealer said you have to buy a fender that had this option from the factory to get it Pre cut.. OK. I guess I will try to flip it upside down and make a template to see how it looks.. Still don't think I have the BA..S to do this...DAM....

 

Yes sir,, I do believe you are correct in your statement. Some of us need to find out the hard way. I have the snorkel but no template !!!

 

Piece of cardboard or paper, get is around the main hole and use a pencil to capture the parts that are the screw areas as you could shade them to see the points. Once you have that done then use painters tape to mask off the fender so that you can transfer it to the tape. You can do it, I cut about 10-12" off my rear fenders to install my HC bumper....

 

The DAI snorkel is super ugly... so if anyone has one on their AG Pro I'd be willing to do them a favor and swap for my non-snorkel fender and air box

 

I am going to have you come over to my shop and have it. YOU GAME ??? LOL

 

I would def help.... but your cutting

 

Hey thanks ur ok. But the deal is you have to cut and warranty the cut. You are a real pal. I will send you my address

 

I take no responsibility in quality cuts once the beer starts flowing....


I hope your in texas...

 

ROCHESTER NY I will send you some plane tickets and buy the beer after the cuts are done..

 

Didnt you mention that your buddy had the pro with snorkel? You can get some measurements from his truck to help make your template.

 

Just need the right size/quality hole saw and it'll cut the right size hole out nice and clean in a few seconds.

IMO it's way more nerve wracking trimming a bumper or fender because with those, you're having to make clean lines and if you mess up, it's gonna show. If you somehow mess up with a hole saw (which would be impressive because it's not hard to use), the snorkel will cover it anyway.

 

This

 

Cut my fender with the aid of a laser level,,, made it easy to follow.

 

Yes, I thought about that and that may work. But it is still is guessing to a point..

 

I guess, but you can fine tune some stiff paper until you get the correct placement before actually cutting metal. It will make your job much easier and confident when making your cut, as opposed to hoping the hole is perfectly positioned.

You can also check with the dealer you purchased the kit from to see if they can provide you the template.

 

You do know that there's a anchor point on the roof? Works out well for mounting
my new scanner antenna.