1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Cincinnati Area Thread (Tri-State, Ohio/Kentucky/Indiana)

Discussion in 'Ohio' started by Breezy, Nov 1, 2015.

  1. Jun 2, 2020 at 4:27 PM
    beertimecontinuum

    beertimecontinuum What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,991
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Pull the o-ring off the bad sensor and reinstall, run it on-road a while. Will be fine.
     
  2. Jun 2, 2020 at 4:30 PM
    JohnnyRed

    JohnnyRed Well-Known Member

    Joined:
    Oct 24, 2016
    Member:
    #200536
    Messages:
    732
    Gender:
    Male
    First Name:
    John
    Northern Kentucky
    Vehicle:
    2008 DCLB TRD Sport
    Or drive with no sensor while it's HOT!

    Thanks!
     
  3. Jun 2, 2020 at 4:31 PM
    beertimecontinuum

    beertimecontinuum What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,991
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Yes but I wouldn't leave it out for long, dust/debris in grease is worse than water /opinion :cheers:
     
    Bandido and dirty deeds like this.
  4. Jun 2, 2020 at 5:33 PM
    JohnnyRed

    JohnnyRed Well-Known Member

    Joined:
    Oct 24, 2016
    Member:
    #200536
    Messages:
    732
    Gender:
    Male
    First Name:
    John
    Northern Kentucky
    Vehicle:
    2008 DCLB TRD Sport
    Good call
     
  5. Jun 3, 2020 at 6:04 AM
    Bandido

    Bandido Engine...er

    Joined:
    Sep 4, 2017
    Member:
    #229072
    Messages:
    2,297
    Gender:
    Male
    First Name:
    Alex
    Lexington, KY
    Vehicle:
    2003 Tacoma DC
    So the wifi switch on my x20 went out due to corrosion (seems like a common issue). I contacted smittybilt for a replacement, expecting just the switch, but they sent a new solenoid block with an updated switch!!

    Hopefully it holds up longer than the last one!
    20200602_155021.jpg
     
  6. Jun 3, 2020 at 6:35 AM
    JohnnyRed

    JohnnyRed Well-Known Member

    Joined:
    Oct 24, 2016
    Member:
    #200536
    Messages:
    732
    Gender:
    Male
    First Name:
    John
    Northern Kentucky
    Vehicle:
    2008 DCLB TRD Sport
  7. Jun 3, 2020 at 6:46 AM
    Bandido

    Bandido Engine...er

    Joined:
    Sep 4, 2017
    Member:
    #229072
    Messages:
    2,297
    Gender:
    Male
    First Name:
    Alex
    Lexington, KY
    Vehicle:
    2003 Tacoma DC
    It was just the switch, running on the wire worked fine.

    I took the solenoid block apart and the switch was the only thing with any corrosion at all.

    However IDK how the thing gets its IP68 rating without fully potted electronics
     
  8. Jun 3, 2020 at 7:10 AM
    Bandido

    Bandido Engine...er

    Joined:
    Sep 4, 2017
    Member:
    #229072
    Messages:
    2,297
    Gender:
    Male
    First Name:
    Alex
    Lexington, KY
    Vehicle:
    2003 Tacoma DC
    Unrelated, I did Spa's creek Sunday morning as a spur of the moment thing with a friend in a stock 3rd gen T4R, the top of that is pretty nasty now, also the bosch style 30/40a relay I have running my fan burnt up, and that was a surprise! its on a 25a circuit with appropriately sized wires, had to swap in the relay from my front spots to drive home... I guess those front spots came in handy for something!
     
  9. Jun 3, 2020 at 7:47 AM
    dirty deeds

    dirty deeds Big Blue Nation!

    Joined:
    Oct 13, 2016
    Member:
    #199662
    Messages:
    29,322
    Gender:
    Male
    First Name:
    Nick
    Eastern KY
    Vehicle:
    '14 Wht AC SR, 2.7, MT, Baja wheels
    PlastiDip front emblem, twine, and Scotch tape
    I don't remember Spaa's, we've been too many places. All the rocks, trees, and mud holes look the same now lol
     
  10. Jun 3, 2020 at 8:05 AM
    JohnnyRed

    JohnnyRed Well-Known Member

    Joined:
    Oct 24, 2016
    Member:
    #200536
    Messages:
    732
    Gender:
    Male
    First Name:
    John
    Northern Kentucky
    Vehicle:
    2008 DCLB TRD Sport
    How did the 4runner do? I was just talking to some guys last night about if a stock runner could make it through. What tires were on it?
     
  11. Jun 3, 2020 at 8:09 AM
    Bandido

    Bandido Engine...er

    Joined:
    Sep 4, 2017
    Member:
    #229072
    Messages:
    2,297
    Gender:
    Male
    First Name:
    Alex
    Lexington, KY
    Vehicle:
    2003 Tacoma DC
    Some bald stock sized tires.

    It only needed help thru the mud-hole at the top and did a decent but not unreasonable amount of spotting, we went reeeeallly slow.

    I was a bit surprised. If the swaybars were removed and it had 31's with decent tread it probably would have made it just fine.
     
  12. Jun 4, 2020 at 3:36 PM
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    I learned today that carrying an extra tie rod would’ve been a good idea.
     
  13. Jun 4, 2020 at 3:37 PM
    rdpoe

    rdpoe #2WDFTW

    Joined:
    May 28, 2018
    Member:
    #254789
    Messages:
    1,733
    Gender:
    Male
    First Name:
    Ryan
    Central Kentucky
    Vehicle:
    2019 TRD OR DCLB (Sold), Honda Civic TRD PRO
    Uh oh, sounds like a story on the making....
     
  14. Jun 4, 2020 at 3:37 PM
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    I learned today that carrying an extra tie rod would’ve been a good idea.
     
  15. Jun 4, 2020 at 3:38 PM
    rdpoe

    rdpoe #2WDFTW

    Joined:
    May 28, 2018
    Member:
    #254789
    Messages:
    1,733
    Gender:
    Male
    First Name:
    Ryan
    Central Kentucky
    Vehicle:
    2019 TRD OR DCLB (Sold), Honda Civic TRD PRO
    Pm for adventures next time mang! I'm friendly enough!
     
  16. Jun 4, 2020 at 3:38 PM
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    I learned today that carrying an extra tie rod would’ve been a good idea.
     
  17. Jun 4, 2020 at 3:49 PM
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Sorry it posted so many times. 372B728D-ABBA-4443-BB15-05819E0EF136.jpg
     
    dirty deeds and iwashmycar like this.
  18. Jun 4, 2020 at 3:52 PM
    rdpoe

    rdpoe #2WDFTW

    Joined:
    May 28, 2018
    Member:
    #254789
    Messages:
    1,733
    Gender:
    Male
    First Name:
    Ryan
    Central Kentucky
    Vehicle:
    2019 TRD OR DCLB (Sold), Honda Civic TRD PRO
    Oops
     
  19. Jun 4, 2020 at 4:02 PM
    TRDZILA

    TRDZILA MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Yep. Now exploring Haspin Acres on foot.
     
    rdpoe[QUOTED] likes this.
  20. Jun 4, 2020 at 5:30 PM
    dirty deeds

    dirty deeds Big Blue Nation!

    Joined:
    Oct 13, 2016
    Member:
    #199662
    Messages:
    29,322
    Gender:
    Male
    First Name:
    Nick
    Eastern KY
    Vehicle:
    '14 Wht AC SR, 2.7, MT, Baja wheels
    PlastiDip front emblem, twine, and Scotch tape
    Nice!!
    You either went too fast or came down on something hard, tell us!
     

Products Discussed in

To Top