Need info on to remove 4” lift to stock

I want to remove my front suspension and go back to store it has coilovers . Will this be a easy task , anyone have and old good used front end struts etc

 

You sure that thing doesn't have a drop bracket lift?

 

4wd or 2wd 4 inch lift.... 2wd... simple, 4wd drop bracket, simple enough if you can weld your cross member back in.

 

That’s more than a 4” kit. Also looks like it has a body lift kit.

 

Either way if there is a drop bracket it will not be an easy swap. You will need to remove the bracket and break out a welder to get it back to stock.

 

I have some stock 2015 TRD sport stuff. Front struts, front springs, rear springs and I think I have the old strut top bushes and plates for front struts. No rear struts since I had to cut the nuts off the top and cut into the stud. You can have the rears if you want, but they would need new studs welded on or something, which seems like a bad idea. Upper spring seats are worn but yours if you want them. No leaf shackles, which you might not need anyway. it all has 65k on it but rode well, had good support and no clunks/leaks when I took it off about 2 weeks ago.

https://www.tacomaworld.com/threads/stock-2015-trd-sport-suspension-parts.669710/

 

OP, a bit off topic but if you bought the truck this way and that aftermarket bed decal reads "TRD sport", you might have been misled.

 

the fuggin dodge tow mirrors.... LOL. Also def not a TRD sport... chrome grill, non color matched handles, no hood scoop.

Take some pics of the front suspension.

 

Is not a TRD sticker looks cool

 

Thanks man I sold it bought me Another one but the GSL- SE and
my 3 Rotor E- Shaft came in

 

yep it does have a drop bracket , I know how to weld but how will I find that bar now .

 

cool I may need that but I don’t need leaf springs since Toyota swap for new ones and all I Have to do in rear is remove block and change shocks . Front is going to be the tuff part

 

I’m like those V6 guys putting a V8 sticker on it sorry .

 

how will I do it ? I have a 2005 Tundra now and want to put this one back to stock to sell it

 

Is this the part I need ? I just checked Ebay . Will it be different from ext cab to a 4 door ?

 

No. That’s a transmission crossmember.

 

I suggest to just remove the decals and simply try to sell it as is first before investing in removing the lift. There may be buyers that like that look. Just don't mislead the potential buyers.

 

Really , dam it ok

 

I'd try to sell it with the lift first before spending time and money reverting it back. If you lower it, you'll also probably need to get new smaller tires, maybe different wheels, etc. Cost will add up. Probably can make up the difference just selling it as is.

 

Truck looks sweet as it sits.