Motorcycles BS Thread 2.0

Dude just to get the part # hahaha

 

I will not give them any business, ever. I don’t care if they were across the street from my house and they were going to give it to me for free. Fuck them.

so I played around with the mirrors just now. I took the right mirror and put it on the left side and it mounts up fine. So just need that same bracket for the right side it seems. Really easy swap. Might order my front turn signals so I can do that and get rid of these giant ass things up front.

 

But there isn’t two holes on the right side...

The mirror and signal light are one unit in one hole....


The other side .. has the bracket and two separate holes. one for mirror one for signal

 

Right, so I need the same bracket for the right side that is on the left side. I didn’t leave it there, I put them back but I wanted to see what it looked like with them under the bars instead of over. It only takes 2 mins to swap em

 

Look... two holes...VS the one hole

 

Did you take it off? That bracket on the left has the hole for the mirror to go through, and then a stud to screw the indicator in to. On the right side the indicator screws in to the mirror. Hence you only need the bracket for the right side and the nut to match it. The right side indicator will then attach to the bracket as it does on the left

 

I get that. But it won’t be flush. . . You’d have a lop-sided signal light... it’d be pushed way infront.

 

You can adjust the bracket to a different angle.

either way, I am replacing the front indicators with something really low profile that you won’t be able to really see anyways, so it’s a non issue for me.

 

Maybe I’m stupid haha... I’ll play around with it.


What are you switching too

 

Most likely these

https://www.speed-kingscycle.com/co...ini-led-front-blinkers?variant=18454422028386

 

Oooooo... those are nice !
Plug and Play ?

 

No, some cutting and soldering. But should be easy. @GHOST SHIP has them too

 

Is this the same license plate mounting bracket you have? I can’t figure out how to turn it vertical. If I take the center bolt out, it’s no longer flush and doesn’t really bolt on well

 

I tried that too. I just decided to leave it horizontal

 

I quote dislike the location of it. I want to get one of those fender mounted ones but they’re pricey. I saw one that looked really clean and had integrated lights but was like 220

 

Ouch. I think im going to get a curved axle mount one. Eventually/maybe in winter

 

I don’t have the front outer plate.. “top rocker”


Take that middle washer out. Then move the piece that comes off ... underneath the piece that is mounted to the LED lights

 

the reaction every time someone tells @uhplifted anything HB HD related is priceless

 

But your mount is the same other than the top rocker portion?

 

Jeebus. It’s like you guys are afraid to cut stuff on your new bikes. Bring them both over, I’ll cut them up real nice.