Prerunner to 4x4 Conversion

Thanks bud!

 

No. Ordered from him and super talkative until her got my money and then ghost status

 

I'll be building my own from my stock one. With some help from a buddy

 

That’s what we did on mine. I was easy once we figured out the angle it needed to go in. Minus tightening up the rear and front ds that was the last thing we did. Well add fluids after

 

DS?

Edit: I'm dumb. But I was thinking install the tranny THEN figure out the crossmember. Is that what you did?

 

Well 3wd if we’re being really technical

 

Yes

 

Exactly.

 

Only if you have a locker.

 

Which op does

 

I’m trying to find the video for you we referenced numerous times it’s a 3 part video from the Toyota time channel. If you’ve never pulled your trans then this video will help tremendously and also lay out all the tools you’re going to need.

 

Found it !!

Part 1
https://youtu.be/oZDSjlxl2Q4

Part 2
https://youtu.be/O4GA3UhPC5Y

Part 3
https://youtu.be/T4YY3IfnzaQ

only use these for the trans part. The rest use the fj transfer case thread for on the tc

 

I'm in Richmond, Virginia and just finished up the last of my 4wd conversion today. Had the exhaust rerouted Friday. Had a few issues at first, but they turned out to be simple mistakes. Good luck with the build!

 

Good point I forgot about the exhaust re route.

 

What part of Knoxville are you from? I grew up in fountain city.

 

Karns.

 

Also dont be afraid to reach out to some of the guys who have done the conversion already. A couple of the guys on here helped me out a lot when I needed some advice.

 

Maybe we can link up and I can checkout your setup? That's an easy drive

 

Op when do you plan on starting this? I am usually free on the weekends but if I know when you’re starting I can make sure to keep my phone on me incase you get stuck.

 

I'm still piecing together parts. Hopefully in the next month or so. Ill keep everyone posted. All I have now is the tranny and tcase. Will get the tranny mount and a bunch of bolts this week and hopefully a lead on driveshafts shortly. I plan on doing it in two phases so once I have the rear driveshaft I'll probably get the tranny and tcase in and just have a 2wd with a tcase for however long i need to get the front end parts collected

Thanks an awesome offer. Adams got to stick together