What Have You Done To Your 3rd Gen Today?

I was gonna say this but though some of the more sensitive members might be offended.

 

The truck feels so much better, especially in harder or faster turns. I can actually feel how stable the grip on the road is. The flex in the frame without the brackets is a lot more and makes it harder to get a feel for the road.

 

The 2020 doesn't have a cubby, it has switch blanks there instead.

I had too many switch blanks and I hate that, so I swapped mine out for the one with the cubby and three less empty switch holes.

If you just want more factory size switch holes, just get the part from the 2020.

Its $40.

 

Sounds solid
glad to hear they're holding up well for you and it seems like i'll be ordering a set soon

cheers!

 

any idea what the part number is?
if not off the top of your head, i'll look into it and update the post later

 

They'll come raw. I hit them with some textured outdoor spray paint and it looks pretty good.

 

thanks for the heads up that it comes raw, i'll get to us my new found joy in using the etching primer and bed-liner combo.

 

What lug nuts did you go with for the ProComp wheels?

 

I vote 1st one.

 

Nope.

Its stamped on the back with 55446-04090 ABS TX

 

First tow for the 3rd Gen! Only a short tow to the boat ramp but pulled like a champ. Thank goodness for the Air-Rid kit, still a bit much for the stock suspension. Had the Air-Ride on the 2nd Gen and a similar 75psi has her setting pretty nice. Now if I can just get time to install my 2LM PnP from @lapoltba I'll be all set

 

nice color-matching!

 

Got the idea from the old T100s I believe they came in yellow (Toy Story). There is also the white one with the big TRD sripes

 

this is going back a few years, but if i recall correctly they are just the regular Procomp spline lugs from 4wheelparts. Inch and a half tall if i recall correctly.
black painted or powder coated - not sure most of it had chipped off and it just showing surface rust

 

You should absolutely Pizza Planet your truck, YO.

 

Installed the Morimoto head/fog lights over the weekend

 

Same combo I went with

 

M E S O !

 

You need the "104"!
I need the 104!

 

Funny.........., I remember that color.
Gerber strained peaches if I remember correctly.