What Have You Done To Your 3rd Gen Today?

I really like the Decked system but it’s too much for me too.

 

Did this little mod to get rid of the nasty little rub from -38mm offset.
https://youtu.be/2IzmH2LRu6A
This is the video that shows how to trim and relocate the front fender liner. My tires aren't as tall as the ones in the video. For the back of the liner I just used a heatgun and softened the plastic and pushed it in and out of the way.

 

What is the plywood thickness? 3/4”?

 

Or you just could have bought an SR. Chrome delete takes exactly 7 minutes and 36 seconds for the whole truck! Lol. Just playin' your truck looks great!

 

Tire rotation, new engine and cabin air filter and a little engine bay cleaning all after a 330 mile trip home.

 

Dealer sticker mod lol

 

I work in an office downtown and the parking spaces in the lot I park in are tiny. I use it when I'm parking so I know how close I am to the person in front of me. I try to pull in as far as I can to avoid having people hit my rear bumper, which has happened before (hit and run). Especially helpful when the truck in front of me has a huge tow hitch.

I can see it also being useful when off-roading, which I'll be doing in Colorado soon...

 

I wish I was your neighbor.

 

Ok, cool?

There are often times when I head outside to grab something from inside the truck and the driver's door is opposite of my approach, and so I head to the passenger's side door first...

 

Ditto!

 

I used the plywood between the 1/2 and 3/4" thickness. I have already forgot the dimension of what it's called. But it's around 5/8"
We are not that heavy and with that center "I Beam", even 1/2" would have done it.
I believe it was 19/32". $19 and change a sheet. Didn't need 3/4".
Got the indoor/outdoor carpeting for .40/ft.
And the rest of the lumber for the notched out bed supports I found in my stash.
I have under $55 and 1.5 hours invested.
With the rolling shallow plastic storage boxes, I'll still come in under a Benjamin, easy.

 

LMAO. C'mon over, bring hot dogs.....and coffee. I've given up drinking..for a while.
Zim

 

I dont see any reason why you couldn't wire the lights to a switch in the dash like others do to run other accessories.

 

Today I found out i ordered the wrong fog light bulbs. I have H16, not H11 like most ORs I read about. These are the new Tungsram straight from the UK. Live and learn!

 

I had to use a square shanked #2 Phillips screwdriver and Vise Grip pliers on the shaft to break mine loose. It was early morning at work but I could tell the screw had some threadlocker on it. All the while trying to NOT bend or damage the fuel door!

 

Well, finally pulled the trigger on gears. Scheduled to go in the 22nd to have them installed. Frustrating to have this done, as I’ve completed all of the work on my truck so far. This is just outside of my realm of knowledge. Hoping all the statements are true and the lower gears are going to blow my mind.

 

Be sure to give us an update. I'm curious as well.

 

This is the reason I haven't done this mod.

 

I got mine out with no issues. Make sure you have the right size screwdriver for sure.

 

Been fighting with mounting a light bar to a Knick off roof rack. Finally got the bar mounted and now the premade wiring harness is not working the way I want. Always hot vs only when the engine is running. Decided to come back to that and install my Anytime backup/front camera. I think I drilled the hole for the camera at a slight angle. It looks a bit catty wompus.