1st Gen Lunchtable Thread - General Discussion

Where are you feeling for PCV, you should have two nipples, or three if it were a Honda or Mitsubishi.

 

Well i tell a lie the blow by is as bad as the day i got it it just isnt flowing through the pcv anymore

I checked it before i overheated it by unplugging the pcv caping off the vac nipple and the crankcase breather and taking the oil cap off

Doing that now yields identical results

 

Theres the breather that goes to the intake tube that one has nothing coming out as its running with the pcv valve taken out

Than the pcv that goes to intake vac. If i pull the pcv valve while running no blowby comes out

But of i take the oil cap off it comes out

 

Just sell it for 500$ on craigslist and move on

 

Everything sounds normal to me. It won't flow unless it reaches a threshold. Every old Toyota will have puffs out the VC oil cap hole. By the way don't do that, they don't like it since it's technically an unmetered air leak.

 

The real trick is an oil filter delete kit

 

The real trick is the no engine kit

 

I'm going to woof this mother fucker down soon as I get home

@cruiserguy

Double chocolate chip and peanut butter banana nut bread.

Our DMV/title clerk made it for me...home made since she knows I love it. Normally it's just a few slices but this time she made me an entire loaf.

 

That's pretty easy to loop haha

 

Could poorly sealing/seating valves contribute to something like that?

 

The blow isnt coming out of the pcv though

With the pcv connected the cap dances the same amount as whit it disconnected

The valve itself is new and its plumbed from the intake to the manifold with fuel injection hose so it isnt cavitating

This sucks as a giant oil leak sprung pu but it wont matter if i fix since the next one will blow too

 

Again this sounds normal, go find another old toyota or something and feel it, you won't feel anything from the PCV unless you're giving her hell

 

@Running Board Man i can hook you up with a oil filter off a hvac unit lol

 

My tacoma and 4 runner had a slight bit of vacume at the oil cap

 

I don't believe you

 

His tacoma and runner probably Had vacuum leaks

 

If i put a latex glove over the oil filler hole it would somewhat cavitate on both trucks

 

Guarentee you they didnt they both idled right, always gave my dad shit about it cause he could never get the idle right on his bmw

Not to mention that has nothing to do with whats going on in the crankcase

 

Oh you know that's gonna be good. Maybe we can tempt Miguelito into sparing us 2 bedrooms in his new place with a loaf of that