Ride height measurement stock vs. lifted

Need a little help here guys, I recently bought a 03 TRD Tacoma that came with a fabtech lift. The front shocks are shot, and am currently trying to piece together some TRD coils with Bilstein 5100's. I'd like to keep the same ride height so I turn to you all to give me specs.

Measuring from the center of the hub to the top of the fender well, I get:
22 3/4" driver side
23 1/4" passenger side

So for those of you who have billy's can you please chime in and relay your measurements? Also let me know what setting they are on. Important to measure from said points since my tires are 285's and measuring from top of tire or ground won't be accurate. If your truck is stock height let me know what that measurement is too.

Thanks much

 

Come on guys help me out here. Someone with billy 5100's on top notch chime in! Whats you measuement hub to fender well???

 

Iam at work but I will look in my notes when I get home. I will reply you about 4:00pm. AZ. time

 

Im stock, and just measured them at 20 3/4"... I have well guards on still, so maybe add 1/4"?

 

well guards? Are you talking bout the fender flares? Thanks for that. So it seems my fabbys are netting me approx 2.5"-3" lift.

 

Hay bud,sorry running a little late. When my truck was stock, with about 19000 miles on it. It was 35&13/16in. drives and 35&7/8in. pass. side. Now that was from the ground to the bottem of the fender well opening. With chrome trim. No fender flaers. Hope that helps..

 

Just set the 5100's at 0 and get the Eibachs I got 3 1/2 with that setup.

 

FWIW I'm at 22 7/8 on both sides (the beauty of adjustable COs). Based on pre-lift comparison, that is right at 2" over stock.

 

I hear ya on the adjustables. Thats what I have now but they are corroded beyond ability to adjust. Had ICONS on my Tundra before this Tacoma purchase..so point bein I'm aware haha. Thanks guys appreciate the info....not as hard into high speed wheelin as I used to be so billy 5100's ought to do fine.

 

Lol... I go all the way outside to do the guy a quick favor, and in return I get a proper grammar lesson... Nice! There is an A in bout, my friend... and you could have a 6" lift... but it would still be fabtech. Just sayin'.....

 

don't take that too personally, I was just confused as well guards are the plastic liners inside the fender well that my truck has...was just clarifying! No DB lift here my friend....and the fabtech's are going to be the first thing gone!

Anyhow, I do appreciate your help

 

I don't know if anyone will look at this old thread... there is a useful # of front ride height (axle center to fender opening), does anyone have similar numbers for the rear ? we recently bought an 03 with King coilers and possibly Deavers rear springs. just trying to determine how much it is lifted over stock. it has the wrong rear shocks and I'm hoping the Fox IFP Smooth Bodies will be long enough. cheers, Ken