Texas Classifieds 2.0 - Read Post #1!

Selling a Mercury 2.5 outboard boat motor

Contact me for TW price

https://dallas.craigslist.org/dal/boa/d/dallas-2008-mercury-25-hp-four-stroke/7141700324.html

* Starts easily; Runs great
* New carb and fuel tank in October 2019 (proof attached)
*** Includes original receipt and original bill of sale from original owner
* Includes original owner's manual
* Includes original tool kit (2 extra spark plugs, extra kill switch, emergency pull cord, and some emergency tools)

 

4x Toyota Tundra / Tacoma Bed Cleats

Heavier duty than standard Tacoma bed cleats, fit the same bed rail system without modifications.

More secure hold than Tacoma bed cleats, they have to be slid the length of the rail and do not pop in and out at any segment of the rail.

Maximum load rating of 220 lbs per cleat.

Great condition, never utilized to secure a load. I do not haul or carry heavy items. Upgraded to an ARE Topper and don’t believe I will use these anymore than I already haven’t .

Midlothian, Tx

Come get ‘em - $75

 

Thanks for getting back. Aftering looking at specs I think I'll pass. I was thinking driving was between spot and flood. I need something closer to spot. Thanks again.

 

Hooooooooooooood for sale!

 

I do need a new hood, my original has hail dents and bush scratches.

Wonder what it would take to get that one painted or wrapped

 

Money.. or maybe 3 goats and a cat.. depending on the strength of the dollar

 

Hey so what did you use this for?

 

Buy @Sch0227 's hood, it'll be cheaper, you can sell your old one and Steven is good people, have dealt with him in the past

 

Paint or vinyl?

 

murphy challenge?

 

I just put together to have an extra plate carrier. It’s never even been out of my house, that’s why it still looks new. I’m switching things up and wanting to sell this to fund another ar upper build.

 

Just take it to these guys..

http://www.dallasairbrush.com/portfolio/custom-painted-vehicles-airbrush-schemes/

Maybe they can come up with some sort of air brushed fire taco

 

Bump

 

I wouldn't mind vinyl. You have an idea in mind?

 

I think @MellyMel did some vinyl on her hood and might be able to give an idea on cost and longevity.

 

I also have a 3rd gen black non-scooped hood for sale, taken off of a '16 SR5 @ 30,000. The hood is boxed up, but can take additional pictures if needed. I switched to the scooped hood, so I no longer have a need for the non-scooped hood; I'm trying to clean out the garage.

$200 OBO



$60 SR5 Grill and $30 Air Dam OBO

If grill and dam are purchased together, will sell both for $70


Located in HTX

 

I did my full roof and partial hood. There is definitely a learning curve using the material but it's forgiving. I would definitely order double, if not triple, the amount of material you think you'll go through. I did my roof and hood due peeling. Also make sure you thoroughly clean your paint. Clay bar, wax and all that to get all the trash you can out. Then I've been told it lasts about 2-3 years depending on how your truck is stored. Once you've laid it down take a heat gun or hair dryer to get a good bond. There's TONS of video on YouTube on how to work with the stuff. The biggest thing isaking sure you don't press it down until you like it's placement. Allow it to "float" on the surface. It moves pretty easily. Also finding the right balance of heat to form it to curves. I used the 3m 1080 wrap. If you want to do it yourself I'll lend a hand! Just him me up.

 

Bump. $80

 

Anybody selling a set of leaf springs for a 2nd gen

 

About to have a set of stock leafs for sale hopefully by the end of the week maybe early next week