Let's Talk Lift/Level...Any 2" front - 1" rear Levels?

Very Nice!

 

5100s front and rear. 4th clip on the front (gave almost 2”), 1” block in the rear.

 

A 2” RC with nothing in the rear will 100% front rake. Take it from me. Looked awful. My ‘20 TRD OR only had like 300 miles in it and it looked like it had a droopy diaper.

I have a photo if anyone is interested.

 

tire size? Maybe I missed it. 285/70 or 275/70?

 

Man I am digging through this feed!
Do you have a picture of the 2.25/1?

I just have a 2” RC strut spacer up front and 2” block in the rear now. I don’t mind it but I want less room in the wheel wells. I’m running 285/70-17 Nitto RG but they are P metric tires so I am changing that as well.

I just ordered Billies 6112/5160 with a 1” Eibach block for the rear (with the standard 600# front coil). Cementtaco on Instagram has this set up minus the rear block and looks level. So I added the 1” just to play it safe. The 2” RC alone was NOT a level look. Man I am bitter about that still!

 

That looks perfect! What size tires are you running?

 

255/80/17 Toyo AT3 on method 704 17x8.5 0 offset

 

I'm getting a 2" front 1" rear hear pretty soon. When it's done I'll post some before and after pics.

 

Would you mind posting the links to both front and rear. Great looking truck!

 

Any chance you could also post the link for your 2/1 you used? Love that height.

 

Anybody with a 2/1 lift running 265/75/16s? Please post pic

 

2 in the front. 1.5 in the rear.

 

What lift do you have?

 

Just spacers and blocks for now. The blocks were hand me downs and the front spacers were like 30 bucks. Going to save up for some real suspension though.

 

Nothing wrong with that. Spacers n blocks is what im gonna do

If i went higher than a 2/1 id do a suspension lift

 

Going bilstein 5100s for a 2/1 soon. Do i need to worry about this needle bearing I keep hearing about? Lift shop says I dont need to worry about it. They have done 100s of tacoma and very rare that the bearing issue arises.

 

Im confused is 2/1 nkt a level? I just called my local spot to ask about getting a 2/1 level and he said all Tacomas he does a 3" front and 1.25" rear

He said it takes 2" on front to level with stock rear.

That also does kinda make sense cause when i look up just leveling spacers for front they are 2"

 

2 inch up front put ny front end about 3/4 inch higher than my rear..

 

Ok so thats what i thought. Glad someone can confirm. Thank you

 

I put 1.5 block in the rear. Now the rear is a little higher than the front. I posted a pick earlier in this tread I think