Bilsteins 5100s with 33s

is anyone running 33x10.50s with bilsteins 5100s wondering if they will rub or require minor trimming. im running 32x11.50s on stock suspension and only have a little rubbing.


if anyone has any pics with 33x10.50s on there truck with bilsteins or any different 2.5 to 3inch lift please post them up if you dont mind want to see what they look like with a lift. thanks

 

They will rub, I'm running 285 70 17 (32.7) and I rub on the cab mounts

 

that sucks dude. how does everyone run 33s on here jsut alot of trimming?

 

pretty much..get a dremel too

 

yeah thats what i was thinking

 

I have 33.4x9.5's on about 2" of lift. Check my build for pics.

 

Yeah you will have to trim. I have 33x12.5's and I had to trim the pinch weld.






This is all the shit I had to cut off most of it is plastic.

 

you have a 2nd gen. op has 1st gen, we don't have cab mount rubbing issues.
but grind down the pinch weld an d paint it,(because hammering it flat creates room for rust) and cut off SOME of the plastic and you'll be fine op!

 

285/75/16 on mine with ~2.75" lift no rubbing except on frame at full lock stock wheels 03 Tacoma

 

X2 that's what I did. I cut away more after I took the picture just so I can stuff the tire a little more at full lock.
I'll take a shot tomorrow it show you how it looks all cut away and shot with an undercoating.

 

while your at it, get a pic of your truck from further away, I wanna see those tires some more. I'm going 285 75 16.

 

Okay will do I planed on taking some shots of the truck tomorrow.

 

you dont rub on the UCA? what tires?

 

Is your rub full left forward and full left reverse?
And does the fender hit full left going into driveways? (curb)

 

is the 33x9.50 tires in your second pic

 

dang you do have to cut alot i wonder if it would be tha bad with 10.50

 

Yeah, I'll just post some up. Oh and they're more like 33x10 (255/85/16)

 

I just went off road near the RR Tracks today and I need to cut a lot more.

Also I'm sure you will be fine My rims are 15x10" with a -44mm offset that's why I'm rubbing a lot off road.

 

awhile back i was running a 265x75x18 tire and it rubed only a little and the tire conversions sya it about a 33.6x10.50 tire. and that was on a non lifted truck. so it may fit but going to have to do some cutting

 

LIke the truck steve o 77 what lift do you have?