3rd Gen White Tacomas - Post them up!

2.0's are without a doubt the better suspension. Billie's are an excellent lift height but it's a tight ride, pretty stiff. 2.0's really smoothes it out. From factory setting, I have them set at 10 turns on the driver side and 7 turns on the passenger.
Have a rake back to front of almost a full inch.
I have 285/75/16's and I get a slight rub at certain angles (usually in reverse) but it's rare. I've trimmed the wheel wells too. I am thinking of going to 7 turns driver, 4 turns passenger and adding 1/4" leveling plates to each side to get that last couple of millimeters to avoid any rubbing at all.

That said, I am not in the slightest annoyed by the rubbing because it happens so rarely.

If I wheeled more often and on more difficult terrain I would go with some other suspension, 2.5's, Kings, etc...

 

Thank you! I'm pretty excited for my 2.0's to come in the mail

At this point trying to decide how much, if any, I am going to adjust the fronts and what kind of rear lift I will need to run accordingly.

 

Exploring the TX Hill Country between Austin and Fredricksburg

 

Whats up guys

Just picked up my super white DCSB last Friday, really stoked on having this as my first truck

 

Welcome to TW!

 

Haha it is quite large but this bumper is phenomenal, push trees and tall brush over with ease. I love how it ties in the corners of the fenders and lower radiator with steel plates. Having the RCI skid plate system the entire front and under body it all steel. OME 886 and Firm shocks the springs have sagged...

 

Hey guys and gals. New here. Here is my Tacoma. 2017 TRD OR

 

Nice looking truck! Are those the Morimotos? How do you like them?

 

Yes they are, and I really do enjoy them. Very nice product with a good warranty.

 

Thanks for the response. My only hesitation is their high beams slightly under perform compared to the stock high beams. Have you used the high beams much and what do you think of them?

 

I rarely run the high beams, if I do need that much light id just use the light bar in my bumper lol. If your holding out because the high beam issue, i wouldnt worry about it. Go head and snag you a pair

 

Alright, you convinced me. LoL!

 

Very clean looking! What's your lift and tire specs?

 

Nice looking truck! What are your lift/tire specs?

 

About 3" King 2.5 remote resi aal 285 75 16 ko2
the classic trd bro setup lol

 

After about 1 year of ownership

Starting:


Current:


Matching set toys:

 

Most recent pic.

 

Nice bed cover, who makes it?

 

For anyone in the Carolinas looking for a topper, I have one for sale.

https://www.tacomaworld.com/threads/are-cx-series-sb-white-shell.667957/