What Have You Done To Your 3rd Gen Today?

Actually did this a few weeks ago but I've been meaning to post this for people who are interested in the TRD Skid Plate but can't justify forking over $380+ on it. This is the stock plate that comes on the TRD Sport/OR.

Overall really pleased on how it came out. Has about 3 coatings of Krylon Fusion Matte Glacier Gray and I hit my towing eyelet red.

Credit to knightacoma on youtube for sharing:https://www.youtube.com/watch?v=en2RjIHNDAI

 

Thanks for the tips everyone. Tomorrow I'll remove the headrests and pick up some lighter fluid. I also ordered 3m adhesive remover. Fingers crossed! Otherwise I'm gonna be peeling, and it's hot!

 

Test Fit Day!!

 

Got one side of the rack feet installed after hours of difficulty trying to get the bolts in. I wasn’t able to use the provided lock washer on the front bolt because the bolt wasn’t long enough. That was the first frustration. The second is how it bites into my truck a little. Maybe I’m just being dramatic. I guess for the price I paid, I figured it would have been a much smoother job. Hopefully the other side goes smoother.

 

bruh now I kinda want to plasti dip my skid plate white haha

 

Blue Sea Systems Rear USB charger

https://youtu.be/dVwWxehurtY

 

Me too.

 

Looking good so far!
Look forward to seeing the finished product.

 

Did you need any special equipment for the airbags? I know I'll need a resistor for the passenger seat, would I need one for just the driver seat? This will be my 1st seat swap and I wanna do it right lol thanks for the help.

 

Do it!

 

Wait.... can you lay on the divider? Did you make it yourself?

 

Hi lift with prinsu brackets

 

Cool! Care to give the location away? I’ll be up in the Seattle area in early september

 

Do you have a part # for the 29mm bulb? I have changed everything to led except for the dome because the one I received is also too big. Also, did you get it from SuperBright? Thank you.

 

Yep. Same pen I keep in my truck.

I used to dispatch for the University of Mississippi (now back in my hometown) The city police was Oxford, MS PD. And the city has an annual festival in last weekend in April called Double Decker. OPD had always has goodies to pass out. Grabbed a few pens, and this was last one. Probably had it 2-3 years.

 

Finished sound deadening the rear door panels today

 

Got my MGM vent rings and maps lights on the way. Already got the red start button, chrome rings replaced with MGM, and the MGM climate control knobs. @MESO has good products as always.

 

Never even thought about doing door card panel. I just did entire inner and outer metal panels.

 

Today's task included installing @mattgecko LED light strips in the bed. Overall, it's not that hard. But if you're like me, and sorta new to wiring stuff up, it took a while to do. Overall, I like how it looks and is functional. If your curious about how the install goes, you can message Matt and he'll send ya the instructions so you know what you are getting into.

On a scale of 1 to 10 (1 being super easy, 10 being a pain in the @$$), I'd rate this install at around a 5. And that's only because I wasn't too confident at the wiring part. But everything works!

 

Lots of little pieces in door card panel that rattle and I’ve found from doing my fronts that it helped big time. Lol I’ve done inside and outside of doors and door card panel on all four doors now plus floors and back. Call me crazy but I enjoy it when I have time and I’m thinking about doing the ceiling next weekend. I’ve put almost 100 sq ft of 80 mil in this truck and 36 sq ft of 150 mil foam