What Have You Done To Your 3rd Gen Today?

Here is my driver side front. I really like the black so I’m gonna cover them all with a light sheet of black

 

I tore out entire interior and covered 90-95% on everything in dynamat extreme and then dynaliner. If I get rattles I know what's next.

 

My front doors barely make noise with stuff inside the side pocket now

 

I used this one and it worked on the first try. Really good light, too.

https://www.superbrightleds.com/mor...edium=email&utm_campaign=product_review_email

 

I tried the Android Joying, but it was consistently having issues, and I put the stock Entune unit back in. Today, I replaced it with this Pioneer. I’m pretty happy with how it turned out.

 

Here's just a couple of pics when I did mine. A lot more than what's recommended but since i had it apart, just did it all.

 

Appreciate it

 

Thank you

 

Wow, that looks super clean! What model H/U is that?

 

Had the new Eibach Stage 2 2.0 coilovers installed last Thursday

 

See below. Install is a little more involved, but is pretty straightforward. So much better than stock.
Pioneer DMH-WC6600NEX
https://www.crutchfield.com/p_130DMC6600/Pioneer-DMH-WC6600NEX.html

 

No resistors needed. Below is a link to my write up regarding the seat install. Driver’s seat needed a seat bracket fabbed but mounted fairly easily. Passenger seat was complicated

https://www.tacomaworld.com/threads/taking-a-tacoma-around-the-world-need-advice.585792/page-36

 

Installed front spacers and UCA'S

 

I used esi super cap seal (double bulb) for the header rail and super cap seal xl (triple bulb) for the side rails.

don’t use my placement for reference- the double bulb/header rail side should of been placed closer to the outer edge.

some people may not like that it sits up higher on the rails rather than the lip hugging the rail (essentially hiding it) but again, for me it’s about the paint

 

Rattles on washboards... but so does every part of the truck... no matter how much suspension is thrown at it

 

Fellow BRO Vet.....o7

 

I have the same ones, didn't notice any difference.

 

I knew it!

 

Happy Father's Day to all of the TW Dad's out there. Have a great day.!

 

@CBoy808 is the man for custom vinyl!

Looks good, his work always does!