New Pioneer DMH-WC6600NEX flush mount install

The power wire from the metra radio antenna (blue) connects to the blue wire on the pioneer harness. The blue wire on the pioneer harness is remote turn on for amps, power antenna, and other things you want to power up when the radio comes on.

 

If you remove the poly screen protector and want to put down a tempered glass protector look here:
https://www.ebay.com/itm/283826811401 you will need the 220mm x 120mm.

 

thank you very much!!

 

Thanks a lot

 

What size do you think will fit best? 220mm x 122mm or 200mm x 120mm?

 

I went with the 220mm x 120mm. The edges of the screen are curved. I'm afraid that if the screen protector gets too close to the edges, you will not get it to lay flat.

 

I did not see an option for 220mm x 120mm

 

I stand corrected. Order 220x122.

 

Thanks. I'll pick one up

 

Yep, it works. Haven’t used it anywhere other than my garage, hence the flash on the screen.

 

couple quick questions. Did you pull the poly protector off?, if so why?, and how does the 220x122 fit? Any pics? Thanks!

 

Where is this kit? Crutchfirld keeps saying it won’t fit my truck

 

Because its not a perfect fit for the opening but it will fit as others have shown here. Cant search by car or it wont show up. Gotta search by radio. https://www.crutchfield.com/p_130DMC6600/Pioneer-DMH-WC6600NEX.html?tp=78184

 

I found that, do I just search for all the parts I need with it? Or is there somewhere that has it all listed for me.

 

The website used to build it out for you but it apparently does not do so anymore:

This is the list by Crutchfield part numbers:



You can re use your factory brackets, but you are going to have to modify them. If you decide to do that, don't order the dash kit.

 

Its all listed in the post you quoted.

 

Thanks, that’s what I needed. Got it all in my cart. Last question, I’m guessing the install is pretty straight forward? All really plug and play?

 

The wiring diagram that comes with the MaestroRR unit is perfect.
The hardest part of the install is fitting your factory brackets to the radio. If you look in this thread, I discuss a template method which is easy and straight forward and puts you in the ball park first pass. Then you can adjust the holes in the brackets to tweak it in exactly as you want it. Once you have the brackets attached and adjusted, harness build is 15-30 mins, 15 minutes and a beer to plug up the harnesses and program the maestroRR. Fit it first, then build your harness and install.

 

How hard was it to get that image on? Did you use wifi tether or USB?

 

Its done with the caravassist app.