What Have You Done To Your 3rd Gen Today?

You're not alone!
Since we never drive from the back seat we'll both survive.

 

Egads, I've been had!

 

Hood is done with paint! Now time to install it

 

I don’t know, all I know is there is a lip that over hangs the rail And looking at other people’s pictures that the dealer installed using that factory flat tape just looked too close for me. I just had it in my head if there was going to be any flex or jolts it wouldn’t have much leeway, also that tape is what maybe 1/4” which will get compressed over time and close the already minimal gap. From my past reading it was always suggested to replace the tape if ever removed/reinstalled (probably because it’s junk, you already have it off and more likely to tear). The stuff I used has more cushion (Possibly seals better is my assumption) seems highly durable and I’d have no issue removing/reinstalling the canopy with the same seal.

I took delivery, new, loaded on the trailer and installed it myself with the seal I posted. Never tried the flat tape

 

Installed 2 great products today. The Taco Garage DSM with a Quad Lock head and a delrin shift knob from user @7r41lbr34k3r.
They were both super simple installs which took maybe 30 minutes from opening the boxes to finish.

 

Regardless thanks for posting it up. I’m going to take a closer look at it. Not worth messing up the paint on a new truck for a shell.

 

The ride was awesome, almost factory like, until the factory wheels and tires were replaced. The ride became a bit rougher when the LT285/55/20 tires and the 20inch wheels were installed. I’ve gotten used to it over time but I can definitely feel the difference when switch between this Tacoma and my spouses, which is all factory.

 

Thanks... I’ll be right on over. I’m actually in the same area, closer to Slaughter and 1st.

 

stock suspension? Looks really good

 

Hello all you good taco universe people. Just stopped in to check on my tonneau cover classified. Still for sale. Ran through forum while i was here.

I did drive the tacoma replacement up to Wilson to try the restaurant @Tullie D suggested Da Bayou only to find it was closed for remodeling. Going to reopen as "the new normal". If it's anything like the real new normal it will suck!

 

Nice knob!

Wait for it...

 

Installed the R4T LCA skids to match my TRD skid plate

 

@RB24 What size rings?

 

Just received and installed Cali Raised LED bed stiffeners for my 2019 TRD OR 4x4. It was surprisingly easy to install. It took me about an hour. I was a little nervous about drilling a hole through metal but it was easier with a center punch and pilot hole. Now, I need to find a bed rack.

 

Total chaos bed stiffeners and OEM LED bed lights (plug and play)

 

Took the black license plate frames that came with my truck from the dealer that has their white lettering written all over it and sprayed painted them all black and reinstalled them. Feels like it increased the torque.

 

Found a guy to even swap my cement flat hood.

 

Check out Forest Park Automotive - Collision Repair

 

Maybe, I have a V-6 Sport. I do not know if the 4Cyl have it or not. It is a thin sheet metal black thing that clearly has to be removed to get to the filter... If you do not have it consider your self lucky! If you really want it (the thin sheet metal one not the TRD Skid) I will send it to you free if you pay shipping...

 

They are men’s size 9. I got those ones on Amazon. They’re actually tire treads.