Northern Virginia Roll Call

its in Adam's quote now. He has to delete that too.

Then you will get someone PMing you 3 years later asking about it

 

probably someone from the Hilux Surf group on FB. There are a surprising amount of them locally

 

I deleted the questionable part of the quote

 

thank you good sir

 

Nothing to see here.

 

@fatfurious2 When you had your frame inspected, did you have any issues driving it home after it failed so you could get it back to stock? I may have mine checked this week

 

No issues. They did the hammer test on the inside driver side next to the cat, and it went through. Then they gave it back to me and said I needed to remove everything aftermarket.

 

Hey dudes, final round of garage clearing:

Pop & lock tailgate power lock deal: all there, probably dirty, instructions available on their website
Redline Tuning hood props: Mostly all there; rivets needed. Rivets can be gotten from Spiker Engineering; install instructions on the Youtubes

These two are frees.

BAMF front bumper reinforcement brackets. I've never installed them; bolts in sealed plastic. I got tired of trying to make them work on my truck. The brackets themselves have been persuaded on with a BFH. The powdercoating got a little scrunched up. Functionally, they're fine. $50 for these.

If anyone wants pictures or whatever let me know and I can post them. I really just want the crap out of the garage.

 

If anyone is looking for a CVT annex and boot bags( I think I still have them) send me a dm.

If you ain't sure it'll fit, we can meet up and you can try it.

100 doll hairs is what I'm letting it go for

 

Does anyone have any information on a possible Meet soon? Im eager to get out haha

 

I'll take the struts

 

Okie dokie. Let me know how you want to get them.

 

Is carrier pigeon an option?

 

DM me an address and I can swing by.

 

Report on the smittybuilt compressor I purchased. I aired down my front driver tire to 10 psi.

Filled the tire from 10 psi to 32 psi in

 

The PSI reading at start and finish was viewed on my 3rd gen tpms screen.

 

What size tire again?

 

315 75 16. The connection to the hose was hot after 1 tire, and the engine was running. After 4 tires, I 100 percent would recommend not touching the air hose connectors with your bare hands if you value the skin there

 

still have? I think mine are leaking after 4 years. Dont need the rivets

EDIT: I am too slow.