What Have You Done To Your 3rd Gen Today?

Which overlay did you get? From jimmyrigged?

 

AJT

 

Let's not brag too much lol

 

is the auto light sensor located under that plastic piece on pass side front?

 

Link?

 

https://www.ajtdesign-llc.com/online-store/2012-Tacoma-2014-Tundra-Emblem-Overlay-c49494321

 

As far as I’m concerned, there’s only one definition of Buckaroo....

 

This is the kit that I used from their direct website.

https://dura-coating.com/products/xl-basic-kit-maintenance-package

 

Great! Add this to the project list. Thanks!

 

You're welcome. It took about 20 minutes from start to finish. Oh, I used binder clips to hole the mat on the plastic while I cut the pieces to size. Then, the glue, stick the mat on. As I said, it dries fast.

 

Installed AVS bugdeflector & some red shackles

 

That is subtle. I was staring at the display trying to figure out what you did to it and never looked at the emblem.

 

Yes. There is a sensitivity adjustment in the options menu between the speedo and tach.

 

Had my buddy at his shop install some Baja Squadron flood lights...also put in the meso turning signals myself. He didn't want to help me with the MESO headlight trim plates because he said it would take too long....SMH...so i'll be doing that after I educate myself via Youtube.

 

Man, I put the headlight trim plate in. I will def acknowledge it makes a world of difference in the way it looks. But F****CCKKK. You will cuss yourself (and the truck) up one side and down the other. Getting those fender flares and front bumper part off are a bitch. It's a lot of work for one small piece.

And you HAVE to be careful NOT to break those tabs of the fend flares. They are very, very fragile and will break easily. Just an FYI. There are a couple of vids on Youtube. But if ya gonna do it. be prepared for some cussing and praying on Sunday for forgiveness.

Mine after installed:

 

It's one of those things where you stare at the picture kinda looking right through it with unfocused eyes and another completely different image will pop up. Yeah, it's pretty cool.

 

No vibration at all. The ride was actually very close to stock until I did the tire and wheel swap.

 

So far I’m loving it. Ride is much better over the spacer lift I had on before.

 

Just locker? Or regear also?

 

4 pronged pick up tool if it didn't get too far down! Available at some automotive stores and you should also be able to find one on Amazon. First time you have to use it worth it's weight in gold. Good luck!