5100’s 884’s and SDTRUCKSPRINGS 2in AAL - looking for install recommendations

I have a 08 access cab TRD Sport and purchased 5100’s all around, 884’s and SDTRUCKSPRINGS 2inch AAL for the rear. Having it installed this week. Should i leave the 5100’s at 0 or set at the first notch to get a “level” or 2in lift all around? It currently has a leveling kit on it from the previous owner but i hate how it rides so I’m re-doing everything. Would just like to know what the best setting is for the front to level it out with the 2in AAL in the back. I’m running 265 65 17 general grabber at2’s with stock wheels.

 

I may be wrong but if you go with 2” AAL in rear wouldn’t the front lift have to be over 2” to keep it level and not have the factory rake again?

 

Maybe so. That’s why I’m asking if i should set the 5100’s to the first notch with the 884’s...?

 

I’m not well versed in this area that’s why I’m asking for advice

 

I have the 5100 with 885 and a 2in rear aal. I'm right at even front to back. Not sure if that helps at all