Taco lean ... in the rear?

I was measuring up pre-lift and noticed that the Front-to-rear difference on driver side was 1.625", while on passenger side it was 1.5". Expected the difference due to "Taco lean", but that is 1/8" inch difference not the "huge" difference I keep hearing. So, I compared Front r to l and found a difference of 3/8" ... while in the rear it was different by 1/2". Is that normal to have the rear leaning as well as the front? Do you compensate for it? Is there a 1/2" lift block or ????

 

Every time you measure it will be different.

 

Yep that's normal

There are small 5mm spacers for between the rear axle and leaf pack to correct that OME makes

Have one on the DS rear myself

https://www.headstrongoffroad.com/store/p575/OME_5MM_Thick_Rear_Trim_Packer_-_TP04.html