New Pioneer DMH-WC6600NEX flush mount install

[

Sorry no help from me. I haven't tried wired because wireless has been easy and flawless from the beginning. I'm using an S20 Ultra

 

Hi, Thanks for help. Thinking about trying a different Android phone. Maybe others can post which phone's work and the one's that dont.

Wanted to thank Everyone in this thread this has been very helpful!

 

I am able to connect my headunit and the CarAVAssit app. However, I can not for the life of me change my background picture. I have searched my library for the picture I want to set as my background and I hit apply but nothing happen? How do I go about changing the background? What am I doing wrong?

 

Sorry if this has been answered already, but do you still get any readout (music titles, etc.) in the dash center console when using the head unit?

 

You should still get readout in the center console, you can also change the source using right center button on steering wheel control.

 

Good News android auto is working. pioneer radio has a light green wire on harness. according to maestro instructions pioneer green wire to maestro green wire is connected. This didn't work.

If you ground green wire from pioneer harness this allowed android auto to work. Info you guys posted for brake bypass help me with this problem thanks.

 

Were you have trouble with android auto?

 

Ok do u have the avassist app on your phone? If u do go to background custom settings. Select your pictures for each item. Then in the stereo select the av app and once connected you will get a screen that shows from phone to radio or radio to phone. Push on the phone to radio. This will upload the settings and pictures you have applied from the app. Wait for it to say complete. If it does not show your background pics right away power it off and back on. Should be there now

 

Thanks. I will try this tomorrow.

 

If you end up installing this and confirm that it's working correctly, would you mind adding some deets inside the info thread?

 

Will do don't have the system yet. Bumper is next on my list

 

Yes, the dash center console will still read your music titles out.

 

Do anyone else have an issue with the head unit slightly slanting down towards the driver side instead of being straight. Also, do anyone else have their head unit comes out of the bezel more on the driver side then on the passenger side?

 

How are you liking it

 

I like it so far but I really have not had a chance to really enjoy it. I haven't been out of the house lately so I haven't been driving that much. Hopefully I can mess with it some more.

 

You are going to have to adjust the mounting holes in your bracket to allow it to sit flush with the dash bezel.

 

I used the American International TOYK974 Dash Kit from Crutchfield and its is perfectly level but does protrude out just a little. I attempted to modify the OEM factory brackets but that was a mess. I settled on perfectly level and uniform all the way around.

 

That's the kit I used. But it didn't turn out level for me.

 

Take the radio out and see if you can secure the slanted bracket to have it sit more level. You may need to push and lift the unit while screwing it, making micro adjustments to have it sit well. It took me a few tries to have it sit pretty straight.

 

I tried that today too. I'll probably look for a soft spacer to put under the driver side lower mounting arm and see if that will lift it up just a bit to lower it out.