Tacoma Shakes from front to back when accelerating.

I drive a 2010, 6 cylinder, 4WD, Tacoma. Recently when I accelerate once I hit 30 MPH it shakes in the front, when I hit 37ish it shakes just about under the drivers seat, when I hit 40 it shakes in the back. This all comes after an awful squeaking noise started in the rear end of the truck when I take off from a complete stop began earlier this week.

Anybody have a similar problem or have any idea what this could be?

 

Universal joints

 

Welcome aboard btw!

 

Was the squeaking noise a rotational squeak that speeds up as you do? Starts slow and then squeak squeak squeak until it's so fast you can't hear it?

 

Carrier bearing and such...something is getting ready to shrapnel

 

It was bad when I started to accelerate and then went away, I dont think it was speeding up though, I will listen for that next time I go for a drive

 

I should also add that this truck is all stock and the issues got significantly worse after about 120 highway miles yesterday, issues started last week

 

In my experience the rotational squeaking was only noticeable when taking off from a stop up to about 15-20mph

 

It definitely sounds like rotational squeaking now that ive taken it for a drive. The Universal joints have a bit of play in them so I believe that is the issue. I will replace them on Friday when I get the time.
Thanks for the help!

 

Do them all on the rear drive shaft. The other two will also be near death.