Methanol 4.0

30k miles of trouble free opperation.

 

I've never noticed any water come out of the sump when I changed the oil after letting the truck sit for a while.

That said, I do change my oil every 1000 miles so maybe that's why.

 

Hows the blower like the kelford cams?

 

to reply anyone could expect running water
a mountain stream
creek
is a complete exaggeration

methanol/ethanol attract water
combustion of ANY sort creates water

it has to go somewheres ............................

' blow by ' in an engine is real
happens in usually 2 distinct ranges......... at idle & WOT

at isle as the rings rarely are sealing well ( proven by SAE engineers)
at WOT because the piston come to an abrupt stop

most ally racers will attest

 

You act like you’re good with car stuff but your command of the English language makes it very difficult for you to express yourself it seems.

we don’t really have room for know it alls in these threads.

 

if i lived on another continent
if i speak several languages

i am good at automotive....... even better at solving issues
doesnt take a know it all

i dont tell anyone What or how

i speak only to the dilema NOT the personality

that bothers U

dont read my posts......................& U still have a problem

look at all the thousand posts Errors/Mistakes i havent commented on

good luck

 

Believe it or not, I haven't put the blower belt back on... still. The truck is on stands while I check things off the to-do list.

Turns out there was a large piece of my old driver's side header gasket missing, which is probably why I was having weird tune gremlins.

Got to get at it and finish this weekend. I know you're all dying for a cam review.

 

Did you ever get the urd equal length headers?

 

Yeah, those are installed now. Have alternator to do, and I’m making a custom switch panel and that’ll take the most time.

 

Think I’m gonna pull the trigger and get them. But I’m gonna make it easier on the install and swap out my rack and pinion too

 

Well about a year later but I'm about to pull the trigger on the Snow stage 3 kit with the braided lines. Got a little order list going so far including some extra e6000 glue, and an in-line filter along with extra nozzles. Anyone know of a filter thats already set up for the 4AN fittings on the SS braided lines in the kit? Also open to any other suggestions. Nozzle will be tapped into my AFE intake tube for now. Snow says the kit comes with a check valve.

 

Snow stage 3 kit on the way. Huge shout out to @White lightning boosted for taking some time to share his insight and experiences running different setups. Much appreciated brother

 

Have you guys seen this new V3 nozzle that AEM is offering? They did a video on it, you can skip ahead to when they are comparing it to their old v2 nozzle. seems pretty interesting. https://www.youtube.com/watch?v=Y80z6BOONnE

 

I was sold. I ordered a V3 nozzle yesterday. Pretty cool how you can change the cc/min just by swapping out the "swirl generator". I'll be starting with 500cc/min.

 

That does look pretty slick. I like that it has an integrated check valve and filter as well as the changeable swirl generator thingy. Easily disassembled. If it reduces consumption for the same effects that's awesome as well.

That hose is considerably larger than what I'm running though. Will have to figure out how to adapt it to be feasible for my setup.

 

It looks to me it's the same size as the hoses you ran for your Aquamist. Once I get my nozzle in the mail I'll send you the hose diameter.

 

I downloaded the pdf instructions and it said 1/4" hose and it looked that size on the video.

I have wire loom over my tiny hoses in some of the pics so it may look bigger than it is. There's a dirty joke in there somewhere....

 

Let me know how it goes. If I get bored enough I may have to pick up this kit, it looks to be pretty nice. I will wait until you test it and see if it's as good as they claim!

 

Are the nozzles universal ? Or specific to manufacture ?

I’m itching to get a kit.

 

So far as I can tell, they’re compatible with Snow Performance kits and will just drop in to my existing system. I can’t 100% confirm that, however, if not, I believe in my ability to hack it together.

I’ll let you guys know in any case.