Winch Bumper Show-Off

No doubt that is going to look awesome!

 

Victory 4X4 - Blitz winch bumper with Tube and a Smittybilt X2O with a Factor 55 - Flatlink.



Inside the bumper I got a OFFROADTOWN 20" Single Row LED Light Bar.
I had just enough room above the winch to get an Xprite 32” Ultra Thin (1.22 inches) Single Row LED Light Bar held in with Cali Raised LED 32" Light Bar Lower Bumper Brackets.

 

I moved the relay box to on top of the motor and clocked the gearbox to put the handle on top. Access through the bumper is good but you could reach it with the hood open if needed. Hardest part was bolting it into the bumper.

 

@demello bumper w/Smittybilt XRC 9.5 synthetic rope comp winch w/Factor 55 fairlead and Flatlink E

 

I have braces for my overbite

 

Very nice looking setups in this thread. Great inspiration, peeps.

 

Thanks for posting this! I have the same truck, and will be installing the same bumper this weekend (fingers crossed), and every bit of "I've done this" helps!
The stock Pro lights are so bright, so I wanted an amber light bar in the bumper. They were all really expensive, so I bought a basic 20" double row white light bar and will be shining through some 1/4" Acrylic with 92% light transmission that I'll stick inside the bumper. (https://www.mcmaster.com/85635k531/) . All in, thanks to a 10% off $500 coupon code at 4wp.com it'll be under $1,000 for bumper/winch/amber light/black D-rings with red isolators...assuming I don't botch the install, which is entirely possible

 

Ok it took awhile But My Green Lane Aluminium Bumper is install with a Smittlbilt 10 K Winch Everything came out pretty good.

 

Apologies for the tardy response....for some reason this just popped up on my radar. Yes, had to clock gearbox to get the selector handle on top and mount the control box on the over the motor. With the cutouts in the SSO both are easily gotten to.

 

Who makes your bumper ?

 

Green lane Off road in BC Canada

 

thanks,

they ship to USA?

 

Got it on today. Thanks again for the help kheins24!

 

Cbi covert series

 

Southern Style Offroad slimline front bumper with smittybilt x20. Works and looks greats

 

Ooo an excuse to show off my truck! Warn 8000S sitting in an ARB. Australian bumper aficionados (yea I know you freaks exist) will say “There’s a stock Warn Hawse fairlead on an arb?!?!?” Correct, I cut an inch of metal off the bumper to get it to work. Apparently arb doesn’t believe in synthetic line



People say I’m a mall crawler as an insult but clearly they don’t know the kind of malls I crawl

 

Brute Force Fab

 

did the front sag a little bit with all the extra weight?

 

I added 700lb springs