FWP Fab Bed Rail Mounts

So i have seen many people mount their hi-lifts under the bed cover, however i am not sure if any of them were Diamondback's. I would imagine that if the cover sits above the bed rail then it will fit fine.

Also i have found that if you purchase spring nuts (

$11 Thomas & Betts GIDDS-461512 ZA1003/8EG-10 Spring Nut 5 Per Bag, 3/8", Silver

found here) and rip out the spring (east to do) then you can insert the nut anywhere and will not have to remove items that are already mounted. You will also be required to buy bolts and washers, but this is a super easy and clean way to mount/dismount items. The hardware that i ship out will require you to dismount anything already mounted to that rail.


3/8" spring nuts can be found on Amazon or in your local hardware store.
https://smile.amazon.com/Thomas-Bet...ds=spring+nut&qid=1566145959&s=gateway&sr=8-4

 

Just received my universal mounts today. They are going be perfect! Very happy.

Now for a RotoPak mount

 

Glad to see the X bull boards fit in that spot!! I have the same pair in the same color haha and was thinking of putting them there.. Did you just get a pair of universal mounts with hardware?? And what hardware did you use to attach the boards to the mounts?

Thanks in advance. sweet setup.
@Zac of all trades ill be hitting you up when i get my paycheck june 1st
Also, do i need to get the t nuts separate or is the hardware provided enough to attach the mounts to the bed rails??

 

I just went to HD and grabbed some long bolts and lock nuts and made it all work.

 

Still make these? I'ma need the universal mount.

 

Purchased and installed and extremy happy with the product AND the customer service!! I spoke back and forth with @Zac of all trades a couple of times and he surpassed expectations in professionalism and communication (seriously). We had a couple errors pop up and he took responsibility for them made sure we were straight.
Here are some pics of the install. Anyvquestions you can ask me.
Will eventually find a better way to mount my hatchet

 

I have those exactly boards and I have been looking for a way to mount them. I may have to pick these up.

 

Yup if you do hmu I've got the details for how to run the bolts washers nuts etc...

 

you mind if i throw these up on my IG?

 

Not a problem my guy!

 

Thanks man! Do you have an IG i can tag you in?

 

Sorry never saw this but I dont have an active one so you all good.

 

20 pages deep reading everything, impressive. Subed the thread and really want to pull the trigger on a 4 Gallon rotopax bed mount.

 

are the universal mounts still available? cause the website doesnt seem to be working for me

 

PM sent!

 

@Zac of all trades are you still making these? Website link wouldn’t work for me

 

When will the universal mounts be available again? I'd like to get a set for under my cap

 

Rotopax mounts?

 

I've got the bakflip bed cover so my rails sit slightly lower than factory. Curious if anyone with the same cover has gotten the universal mounts/if OP makes an alternative for an axe and shovel for those of us with bed rails that sit lower than factory.