1st Gen Lunchtable Thread - General Discussion

Exactly

 

Sweet, seals for the 4runner arrive today. See how badly i can fuck up the tcase shifting tomorrow.

 

Did I go overkill on the tundras new trans cooler?

 

Noice! Link? Might go that route for the 4runner.

With the heat we have had here the last week, the trans can do nothing but benefit from a large trans cooler.

 

Get gas for that.

 

So dirty

 

My Hobart is a homeowner grade and has gas.

 

Fluxcore needs clean bare metal

 

She’s a biggen
Tru-Cool - Max LPD47391 47391 Low Pressure Drop Transmission Oil Cooler https://www.amazon.com/dp/B0060NKA1U/ref=cm_sw_r_cp_api_i_OeocFb73K3KXR

 

Stick welder would do the job no issues what so ever.

 

Thanks! I'll have a look at the measurements and see if I can make it work.

 

The 30k is more than enough.. I went complete overkill. And the 40k also is setup in a way I can flare my own lines and just in general make it look prettier and easier to remove for any reason

 

Looking at the Amazon reviews and pics, sure is a popular cooler with the Chevy guys!

 

It is complete and utter overkill for a tundra like mine.



I love it

 

If it will fit the 4Runner, it will be even more overkill in that!

 

There's actually a fair amount of room in the front of the 4runner.

 

I’m trying to figure out how I’ll mount it. That’s my big thing. Probably going to be partly blocked by the bumper. But still be more than enough with the impeded air flow

 

Just the additional surface area will be a huge help. As long as part of it has airflow, you're golden.

 

You assholes sent me down a fucking dark and dangerous road. I could read the thousands of different threads and comments for years. How did any of these twats figure out how to use the internet, let alone traverse it to a forum, sign up, and figure out how to communicate with the masses.

Jesus.

 

A fair bit will. The next step is mishimoto radiator. Then I might put a new condensor in since it’s all fubar at the bottom fins... and they’re cheap

Just trying to perfect the truck for use in towing distance... because I really want to drive down and get that damn frame and cab