TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

sorry guys, in and out of service. I’ll get pics and details posted up Monday when I am home

 

Nice no rush

 

Hey bro. I was thinking about your issue.

Have you checked your fan clutch?

Have you managed to check your tranny temperatures when you are rolling? If so, what are they? It actually makes me wonder what the heck mine have been while at idle over the time my fan clutch has been bad during the summer.

 

Inter cooler for the SC is inside SC so that won’t help but I think part of the issue. I do need to wrap up the shroud right the radiator

 

It hit 240 sitting in the inn n out drive through. I can post some screen shots of various temps later. I grabbed some but it’s high.

 

The low temp heat exchanger is stacked with the radiator. Then it exchanges heat in the supercharger.

 

Anybody know if JustDSM can reflash my ECU with the Magnuson tune already installed on it?

 

yes, he turns them back around in one day typically. He can bench flash the TRD tune and set your VIN if it is from a junkyard. Otherwise if you are just trying to get rid of a bully dog tune then yes as well.

@JustDSM

 

Correct!

I can/and do flash them.

If you're sending me an ECU, either yours or a "junkyard" ECU, this service is $95 (Includes return shipping via USPS Priority Mail). This will get you a fresh TRD Calibration with a VIN reprogramming (if needed for a "junkyard" ECU).

I'm also able to source ECU's and send one already converted to TRD specs/VIN reprogrammed.

 

Any of you swap seats? If so what did you do for the occupancy sensor and/or airbag? I have a couple ideas I am researching and those may be the 2 areas I’ll be stuck.

 

I have seen retrofit harness adapters. Let me look again.

 

@3pooches

 

@zippsub9 are you thinking of this one?

https://www.metaltech4x4.com/metal-tech-ocs-module-2-0-w-airbag-resister/#:~:text=The OCS Bypass Module emulates,adult (150+ lbs).

(Item above states NLA....but)
If this is what you need @nudavinci64 , the guy making them is Scott McClure and he sells direct. I can try to find his contact info if you need it.

 

That’s the one

 

We all sent him the same link.

 

If you have time send me the direct info. seems like they won’t be getting Any from metal tech for awhile.

 

Stock seats but missing my airbags. I popped the dash apart and broke off the airbag light led. Same for the maint req light

 

I’ve been highly considering getting the Corbeau Baja XRS’s. From what I’ve heard, they are a shorter seat height than that of stock. I hate feeling like my head is at the ceiling and want to sit lower.

 

Been looking at some prp’s myself to get a lower seat height. At least my head is a little close to the cage. Wife has plenty of head room

 

Which are the prp’s