What Have You Done To Your 3rd Gen Today?

Welcome to TW Jessica!

 

So awesome @MESO. Thanks so much!!

 

Been looking through the forum for weeks now with the same question. Basically what I have garnered is that some people need them and others don't. I put in the same 3 leaf aal two weeks ago drove around didn't get any vibes but just visually examining my rear axle in relation to drive shaft it looked "off" theres a whole big write up in the suspension section on how to take your drive shaft measurements to make sure everything is as close to factory spec as possible. I ended up adding the 2* shims and it looks better now angles are more in line with factory spec. Granted I didn't have vibes in the first place but i don't now either.

 

Looks like the rear view mirror wire cover that connects to headliner.

 

Modded my phone mount. Loved the Mob Armor Mount. But no real good place to stick it that stayed. So I purchased a Proclip. And used E6000 to glue one of my discs to it. Superior. If Proclip offered a mount that would handle a thicker case that would work also. But mine has Superior adjustments. I really like it. And it's removable and Doesent block AC or Controls

 

Do you have a link ? How do they install ?

 

Washer relocation completed:

 

Installed Extreme Dimensions P/N 115392 ram air hood:



Had to drill a hole for the prop rod. The fan shroud seal is transferred from the stock hood and attached with 3M molding tape:

 

Added some door bolt check arm covers. Just gives a cleaner look when door is opened.

8X-SPEED 4pcs Car Door Stopper Protection Cover For Toyota 4runner Matrix Mirai Previa Venza Sienna Zelas Sequoia Tacoma Hilux FJ cruiser

https://www.amazon.com/gp/product/B06XPQSPB5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Before

After

Next will be adding these when they come in.
Door Striker Covers

8X-SPEED 4pcs Car Stlying Accessories Auto Door Striker Cover Compatible with Corolla-EX Camry 2014 Tacoma 2012 VIOS 2005 2006 RAV4 2013 CRV Odyssey Compatible with Mazda 3 (06-10)

https://www.amazon.com/gp/product/B06XPX4FJK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

https://www.ebay.com/itm/4PCS-door-...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

 

I installed the cool white lights under the hood and in bed area. It really does make a difference.

Just out of curiosity, where did you place your button?

I placed mine in on the metal part by the tail lights. I did that because it is easier to reach.

Overall, I gave this a 5 out of 10 on install, and only because I'm a noob with with wiring.

 

I already had 12v power running to my cubby from an earlier mod, so the install was pretty easy for me... just tapped into that wire. I installed my button next to the 110v outlet:

 

Added some subtle decals. Now people who pass by will know who they are looking at.

 

added a steering wheel emblem overlay, Blacked out the badges, Tailgate inserts, and installed a tonneau cover!

 

Yes, the little things do make a difference sometimes. I found TRD covers on EBay last year.

 

Got a hood scoop off a local trade

 

That's just wrong!!! a Sport hood on an Off Road Taco. Just kidding. It's all about the mods and what makes us individuals in a shared Tacoma enthusiast community.

 

i think the sport should be the one without the hood scoop

 

I took mine off. Looks great I think.

 

Here is the link where I purchased it from.

https://www.performancepedals.com/c...oyota-tacoma-billet-pedals-performance-pedals

Block finish in all black.

Here is a link to the installation.

https://www.performancepedals.com/pages/installation

The rubber brake pad cover is removed and holes are drilled into the metal base of the brake. Careful to avoid the thick part in the back. Use the supplied nuts and bolts to put it together. As for the accelerator pedal, drill a small pilot hole then screw the plate down into the plastic.

The pedals are made really well. Well worth the price and extra time I waited for the black finish. It’s very grippy much better then the cheap aluminum covers you can buy that just go on top.

My dad is a long time Toyota truck guy and he never thought to change his pedals till he tried mine. He got the same ones as well.

Note: if you have larger feet and wear wide boots you might want to shift the brake pedal a bit off center if you are worried about how close you might get to the other pedal. The brake pedal is slightly larger then stock which is a nice bonus as well.