The SR thread, let's see them!

Which tires did you put on there? Just got some 32.8 st maxx (255/85/16) and they fit great. Had to see it and drive to believe it. Put them on 4.5 back space, 0 offset, 8 inch wide wheels.

 

That's exactly what I got, they measure out at 33.07". Do they rub with those wheel specs?

 

Haven’t taken a tape measure to them. Just going off of coopers specs. No rub with these scs wheels. Tried in reverse and best I could to try to make them rub on the way home. That’s not to say on an off camber trail full of ruts and rock they won’t rub. They probably would I bet. I’m also lifted bout 1.5 inches front and rear. 4x4 5mt accesse cab

 

16x7 +30 are the stock wheel specs.

Ive got 255/85r16’s on my SR and stock wheels and also rubbed on the UCA. I put spidertrax spacers on and no more rubbing on the UCA, just a little on the aftermarket mud flaps I’ve added. Stance is perfect imo.


Before spacers:




After spacers:

 

1.25 inch wheel spacers?

 

Yep, in blue.

 

I just don't want to run spacers and have to replace bearings every 50K miles. I'm just going to get wheels with less offset.

 

That’s my eventual plan too, I just couldn’t afford new wheels right away. I’m leaning towards the 17x7 TRD Pro 4Runner wheels and 255/80r17’s.

 

Anyone running 265/75/R16 on stock SR steel wheels?
How are they fitting?
Not sure if I need to get new wheels ordered up along with the tires.

Ordered wheels anyway..
I've got 16x8 raceline addicts with 0 offset coming.
Will mate with LT265/75/r16 falken AT s

 

Just picked up my 2020 SR V6 4x4 with SX pkg. I can't wait to add HID lights and LED fogs. Currently reading up which harness to buy and it looks like the truck is already pre-wired with foglight.

This is my first truck/tacoma didnt know tailgates and spare tires can be stolen on these bad boys.

 

Sweet truck..
What is included with the ex package? Do all the 2020 SR have a wire ready for fogs

 

Not sure on the fogs, I did mine with a switch on the left side of the console. Main upgrades that come with 2020 SX pkg = upgraded rims, keyless entry, intermittent wipers. Maybe some other stuff, mine also came with floor mats and mudflaps, I had the dealer add the running boards.

 

Love how badass this truck looks.

 

That is a great looking truck.
What's the wheel and tire combo?
Stock height?

 

Thanks, of course I do too! Having it sort of stealth and not over the top is what I like.

Yes Stock height, was able to get rid of the 245 road donuts via trade plus cash at a cool tire shop the same day I bought it and went to 10 ply AT discoverer 265s. Other mods if you want to call them that, debadged the SX stickers, added the fogs. Rims are the upgraded toyota that came with the SX pkg.

 

Yeah, it's a great look! Any plans for the headlights or tail lights?

 

I've got a SR and I'm hoping to get a similar look.
I'll have to start researching the fog light mod.

 

Yeah, gotta get rid of those blanks. I did the switch version since I didn't want to take my steering column apart and mess with the wiring in there. I am ok at stuff like that but not great and the switch method was relatively easy plus there was a spot on the left side of the console for it.

 

Probably only when they fail someday if they ever do. The ones in there are fine for me, I think the LEDs look cool. but I am practical and cheap . I will get the suspension upgraded a bit because my wife wants a little camper. Hence the ten plys.

 

This is the thread to check out. Lots of valuable info.
https://www.tacomaworld.com/threads/nitoris-oem-sr-foglight-mod.451495/