Mystery Plug Behind Passenger Head Lamp

I found this unplugged cable behind my passenger headlamp and can not locate where it’s home is. Any suggestions?

 

I think some other markets got washer fluid level sensors that the US didnt get, but we still got the wiring for it.

 

Is the truck used?

 

In Canada we have the low washer fluid light.

 

You would think they would of put it on all northern climate trucks. In MN we go through washer fluid faster than gas in the winter.

 

I wonder how much it would take to get that working?

 

I think the wiring is all dead for that sensor in the US, might need something done in the programming to get it to work.

 

Should be relatively easy if you ignore and the wiring there and route your own harness instead. Just mount a simple conductivity sensor then find a blank spot behind the cluster and hook up a light. Post it here for massive likes.

 

I think the wiring is there. You would need the float in the washer fluid container and the dash light if it isn't there.

 

Is the connector on the end of red stripped cable? If yes, it is not OEM.

 

yes sir

 

it is not, it appears to group up with a few other wires and runs through a hole in the bottom of the engine bay above the wheel

 

BTW thanks for all of the quick help! Already glad to have joined the forum

 

That red stripper cable replaced the connector. you have some light mods

 

If he had light mods. Shouldn't there be another connector on the other side?

 

Light bar?

 

The red stripped cable is for a LED headlight kit, not involved in the plug he is looking at.

https://headlightrevolution.com/2016-2020-toyota-tacoma-s-v-4-led-h11/

 

Can confirm that cable is for LED bulbs. I replaced the halogens but this plug wasn’t involved with that

 

Maybe! It’s a shame the previous owner couldn’t leave it for me

 

Check for telltale signs of a removed light bar.